Person

Dr. rer. nat.

Martin Franzke

Process Simulation Expert / Manager IT-Administration

Institute of Metal Forming

Address

Room: 013

Intzestraße 10

52072 Aachen

Contact

workPhone
Phone: +49 241 80 95911
Fax: +49 241 80 92234
 

Publications

Source Author(s)
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions
In: Key engineering materials, 716, 157-164, 2016
[DOI: 10.4028/www.scientific.net/KEM.716.157]
Teller, Marco
Klubakov, Alexej
Franzke, Martin
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
[Journal Article]
Online Visualization during Open Die Forging and Optimization of Pass Schedules
In: Steel research international, 85 (9), 1348-1354, 2014
[DOI: 10.1002/srin.201300396]
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
[Journal Article]
Pass schedule optimization and online visualization in open-die forging
In: Stahl und Eisen, 133 (8), 47-50,52-54, 2013
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
[Journal Article]
Stichplanoptimierung und Onlinevisualisierung beim Freiformschmieden
In: Stahl und Eisen, 133 (8), 47-54, 2013
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
[Contribution to a conference proceedings]
Lightweight construction by open die forging of hollow generator shafts for wind power plants
In: New developments in forging technology : [papers of the International Conference on 'New Developments in Forging Technology' in Fellbach (near Stuttgart) - Germany, on June, 4th and 5th, 2013] / IFU, Institute for Metal Forming Technology of the University Stuttgart ... Ed. by Mathias Liewald. [In cooperation with: Forschungsgesellschaft Umformtechnik mbh (FGU, Stuttgart/Germany) ...], 2013
Recker, Dominik
Rosenstock, Dirk
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Stichplanoptimierung und Online-Visualisierung beim Freiformschmieden
In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 2013
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
[Contribution to a conference proceedings]
Fast process models for the online optimisation of open die forging processes
In: MEFORM 2013 : Simulation von Umformprozessen, 20.-22. März 2013, Altenberg / Hrsg.: Prof. Dr.-Ing. R. Kawalla, 2013
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
[Contribution to a book]
Interaction effects between strip and work roll during flat rolling process
In: Process machine interactions : predicition and manipulation of interactions between manufacturing processes and machine tool structures / Berend Denkena ... (eds.), 2013
[DOI: 10.1007/978-3-642-32448-2_20]
Puchhala, S.
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Optimisation of a basic pass schedule for open die forming with regards to a homogeneous strain distribution along the core
In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, 2012
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Fast, model based grain size calculation of open die forgings on basis of pass schedules
In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, 2012
Rosenstock, Dirk
Recker, Dominik
Henke, Thomas
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
3D-FE simulation of ring rolling with integrated closed-loop tool motion control
In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, 2012
Jenkouk, Vahid
Hirt, Gerhard
Franzke, Martin
[Journal Article]
Finite element analysis of the ring rolling process with integrated closed-loop control
In: CIRP annals : manufacturing technology, 61 (1), 267-270, 2012
[DOI: 10.1016/j.cirp.2012.03.115]
Jenkouk, Vahid
Hirt, Gerhard
Franzke, Martin
Zhang, T.
[Journal Article]
Hohlwellen für Windkraftanlagen Prozessauslegung anhand von FEM-Simulationen
In: Industrie-Management : Zeitschrift für industrielle Geschäftsprozesse, 2011 (2), 73-76, 2011
Hirt, Gerhard
Schafer, David
Franzke, Martin
[Journal Article]
FEM-Simulation des Werkzeugversagens beim Warmmassivumformprozessen infolge thermisch-mechanischer Materialermüdung
In: Schmiede-Journal, 09 (02), 42-46, 2011
Behrens, Bernd-Arno
Bouguecha, Anas
Hadifi, Tarik
Hirt, Gerhard
Franzke, Martin
et al.
[Journal Article]
Fast models for online-optimization during open die forging
In: CIRP annals : manufacturing technology, 60 (1), 295-298, 2011
[DOI: 10.1016/j.cirp.2011.03.142]
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
[Journal Article]
Virtuelle Prozess- und Produktentwicklung in der Umformtechnik
In: Stahl und Eisen, 130 (10), 45-45, 2010
Barton, Gabriel
Li, Xiaoli
Franzke, Martin
[Journal Article]
Grain size prediction during open die forging processes
In: Metallurgia italiana, 2010 (9), 29-35, 2010
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
Steingiesser, K.
[Contribution to a conference proceedings]
Bulk Metal Formed Parts for Power Plants
In: 30. SENAFOR : 14a Conferencia Internacional de Forjamento Brasil = 14th Forging International Conference Brazil ; Porto Alegre, October 20-22, 2010 / Ed. por/Ed. by Lirio Schaeffer ..., 2010
Schäfer, David
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
New Methods for Computer-Assisted Optimization of Forging Die Life
In: 30. SENAFOR : 14a Conferencia Internacional de Forjamento Brasil = 14th Forging International Conference Brazil ; Porto Alegre, October 20-22, 2010 / Ed. por/Ed. by Lirio Schaeffer ..., 2010
Lopez Santaella, Mauricio
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Schnelle Modelle zur Online-Optimierung beim Freiformschmieden
In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 2010
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
[Journal Article]
Ansätze zur Qualitätsoptimierung beim Freiformschmieden
In: Stahl und Eisen, 130 (3), 39-46, 2010
Recker, Dominik
Hirt, Gerhard
Franzke, Martin
[Contribution to a conference proceedings, Journal Article]
Experimental and numerical investigation of grid sheet bending behaviour in four-roll bending
In: CIRP annals : manufacturing technology, 59 (1), 303-306, 2010
[DOI: 10.1016/j.cirp.2010.03.015]
Gu, Xiaobo
Franzke, Martin
Bambach, Markus
Hirt, Gerhard
[Contribution to a conference proceedings]
Optimization of tailored products
In: Computational plasticity X : fundamentals and applications ; proceedings of the X International Conference on Computational Plasticity - fundamentals and applications held in Barcelona, Spain, 02 - 04 September 2009 / a publ. of: International Center for Numerical Methods in Engineering (CINME) Ed. by: E. Oñate ..., 2009
Urban, Marcus
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Grain size prediction during open die forging processes
In: Hot Forming of Steels & Product Properties : international conference ; Grado, Italy, 13 - 16 September 2009 ; proceedings / organized by Associazione Italiana di Metallurgia - AIM, 2009
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
Steingießer, Klaus
[Contribution to a conference proceedings]
Elastic-plastic bending of welded grid sheet
In: Proceedings of the 8th International Conference on Sandwich Structures (ICSS8) ; 6-8 May 2008 Porto, Portugal / Editor: Antonio J. M. Ferreira. - Vol. 2, 2008
Hirt, Gerhard
Kopp, Reiner
Franzke, Martin
van Santen, Johan
[Contribution to a conference proceedings]
Improved remeshing algorithmus for a multi mesh method applied to ring rolling simultion
In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7–11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 2008
Schäfer, David
Hirt, Gerhard
Franzke, Martin
Barton, Gabriel
[Contribution to a conference proceedings]
Four-roll bending of welded grid sheet
In: ICTP 2008 : Advanced Technology of Plasticity ; 9th international conference on Technology of plasticity : the Olympics of Metal-forming : September 7–11, 2008, Gyeongju, Korea / D.Y. Yang ... Korean Society for Technology of Plasticity, 2008
Hirt, Gerhard
Franzke, Martin
Bambach, Markus
van Santen, Johan
Harms, Alexander
et al.
[Contribution to a conference proceedings]
Optimization of forging process of profiled discs for low presure trubine rotors by FEM simulation
In: IFM 2008 Santander Spain : 17th International Forgemasters Meeting, IFM 2008 ; Santander, Spain, 3 - 7 November 2008 / hosted by: Sidenor, 2008
Weides, G.
Blaes, N.
Bokelmann, D.
Hümbert, M.
Poppenhäger, J.
et al.
[Contribution to a conference proceedings]
The open die forging industry associated with the german steel institute VDEh/Germany
In: IFM 2008 Santander Spain : 17th International Forgemasters Meeting, IFM 2008 ; Santander, Spain, 3 - 7 November 2008 / hosted by: Sidenor, 2008
Franzke, Martin
Hirt, Gerhard
Sheikhi, S.
Wuppermann, Carl-Dieter
Rech, Ralf
[Contribution to a conference proceedings]
Gekoppelte Analyse von Massivumformprozessen mit LARSTRAN/Shape
In: Simulation von Umformprozessen : MEFORM 2008 ; 26. bis 28. März 2008 in Freiberg ; Tagungsband / ACATRAIN e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; Institut für Metallformung. [Hrsg. Rudolf Kawalla], 2008
Franzke, Martin
Puchhala, Sreedhar
Dackweiler, Harald
Hirt, Gerhard
[Contribution to a conference proceedings]
Entwicklung eines Prozessmodells zur Online-Optimierung von Freiformschmiedungen großer Blöcke
In: Simulation von Umformprozessen : MEFORM 2008 ; 26. bis 28. März 2008 in Freiberg ; Tagungsband / ACATRAIN e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; Institut für Metallformung. [Hrsg. Rudolf Kawalla], 2008
Franzke, Martin
Recker, Dominik
Hirt, Gerhard
[Contribution to a conference proceedings]
Online calculation of equivalent strain, temperature and microstructure within the workpiece during open die forging
In: 28. SENAFOR : 12. Conferencia Internacional de Forjamento = 12th National forging conference ; [held in Porto Alegre, RS, Brazil, October 8-10, 2008] / ed. por Lirio Schaeffer. LDTM, Laboratorio de Transformacao Mecanica, 2008
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article]
Modelling and optimisation of incremental bulk metal-forming processes for near net shape components
In: International journal of mechatronics and manufacturing systems : IJMMS, 2008, 171-182, 2008
[DOI: 10.1504/IJMMS.2008.020503]
Hofmann, Oliver
Hirt, Gerhard
Franzke, Martin
Schäfter, David
[Journal Article]
Development of a process model for online-optimization of open die forging of large workpieces
In: Steel research international, 79 (10), 753-757, 2008
[DOI: 10.2374/SRI08SP067]
Franzke, Martin
Recker, Dominik
Hirt, Gerhard
[Contribution to a conference proceedings]
Modeling the interaction effects between tools and the work piece for metal forming processes
In: Materials processing and design : modeling, simulation and applications ; NUMIFORM '07 ; proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto, Portugal, 17 - 21 June 2007 / ed. J. M. A. César de Sá ; ; Abel D. Santos, 2007
Franzke, Martin
Puchhala, Sreedhar
Dackweiler, Harald
[Contribution to a conference proceedings]
Modellierung inkrementeller Umformverfahren
In: Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband / 22. ASK, Aachener Stahlkolloquium, 08./09. März 2007, Eurogress Aachen. Institut für Bildsame Formgebung ; Institut für Eisenhüttenkunde, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen, 2007
Bambach, Markus
Barton, Gabriel
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Modelling and optimization of incremental bulk metal forming processes for near net shape components
In: XXVII SENAFOR : XI Conferência Internacional em Forjamento = International Forging Conference - 2007 / Universidade Federal do Rio Grande do Sul, Centro de Tecnologia, Laboratório de Transformaço Mecânica - LdTM, 2007
Hofmann, Oliver
Hirt, Gerhard
Franzke, Martin
Schäfer, David
[Contribution to a conference proceedings]
Size effect on friction and yielding in wire flat rolling
In: Proceedings of the 2nd ICNFT: 2nd International Conference on New Forming Technology : Bremen, Germany, September 20 - 21, 2007 ; [at the Bremen Production Days] / bias, Bremer Institut für angewandte Strahlentechnik. F. Vollertsen, S. Yuan (Eds.), 2007
Putten, van Koos
Franzke, Martin
Hirt, Gerhard
[Journal Article]
Modelling of incremental bulk and sheet metal forming
In: Steel research international, 78 (10/11), 751-755, 2007
Bambach, Markus
Barton, Gabriel
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings, Journal Article]
Implementing and high accuracy multimesh method for incremental bulk metal forming
In: CIRP annals : manufacturing technology, 2007, 313-316, 2007
[DOI: 10.1016/j.cirp.2007.05.072]
Kopp, Reiner
Hirt, Gerhard
Hofmann, Oliver
Franzke, Martin
Barton, Gabriel
[Journal Article]
Influence of different forming and heat treatment stages on the properties of P92-sheet
In: Steel research international, 77 (2), 122-128, 2006
El-Magd, Essam A.
Kopp, Reiner
Franzke, Martin
Gebhard, Jürgen
van Santen, Johan
[Contribution to a conference proceedings]
Finite-elemente modelling of multi-pass forging accelerated by a multi-mesh-method
In: Workshop on Incremental Forming, 18. Mai 2006 / PTU Darmstadt, 2006
Hirt, Gerhard
Barton, Gabriel
Franzke, Martin
[Contribution to a conference proceedings]
Finite-elemente modeling of multi-pass forging accelerated by a multi-mesh-method
In: PtU Workshop Presentations 17./18. Mai 2006, 2006
Barton, G.
Hirt, Gerhard
Franzke, Martin
[Contribution to a conference proceedings]
Microstructure evolution and tool-workpiece interactions in forming simulation
In: 2nd International Conference on Accuracy in Forming Technology : ICAFT 2006 und 13. Sächsische Fachtagung Umformtechnik, SFU 2006. Proceedings : 13.-15. November 2006 Stadthalle Chemnitz / [Hrsg. Reimund Neugebauer]. - Berichte aus dem IWU ; 36, 2006
Hirt, Gerhard
Bambach, Markus
Franzke, Martin
Li, Xiaoli
[Contribution to a conference proceedings]
Finite-elemente modelling of radial forging of nickel-base alloys with all multi-mesh-method
In: IFM 2006 : 16th International Forgemasters Meeting ; 15 - 19 October 2006, Cutlers' Hall, Sheffield, UK ; [conference papers] / [organised by IOM Communications Ltd on behalf of the Institute of Materials, Minerals and Mining], 2006
Barton, Gabriel
Li, Xiaoli
Schneider, Verena
Franzke, Martin
Hirt, Gerhard
[Contribution to a conference proceedings]
Modelling and simulation of incremental changes in plasticity using multi-mesh-methods
In: Building bridges in metallurgy : NIMR Conference 2005 ; Noordwijkerhout, Dec. 12-13, 2005 / NIMR, Netherlands Institute for Metals Research, 2005
Hirt, Gerhard
Franzke, Martin
Hofmann, Oliver
[Contribution to a conference proceedings]
Material data and material modelling for the application of FEM
In: ICFG, 2nd Workshop on Process Simulation in Metalforming Industry ; 21.-24. April 2002, Padua, Italy, 2002
Franzke, Martin
[Contribution to a conference proceedings]
Automatic optimization of metal forming processes
In: The 5th International ESAFORM Conference on Material Forming : [Akademia Gorniczo-Hutnicza], Kraków, April 14 - 17, 2002 ; [proceedings] / [ed. by M. Pietrzyk ...]. - International ESAFORM Conference on Material Forming ; 5 (Kraków) : 2002.04.14-17 / International Conference on Material Forming <5, 2002, Kraków>, 2002
Franzke, Martin
Posielek, Sebastian
Aretz, Holger
Kopp, Reiner
[Contribution to a conference proceedings]
Contoured forging of compressor : and turbine wheels
In: Proceedings / 14th International Forgemasters Meeting : Wiesbaden, Germany, September 3 to 8, 2000 / Verein Deutscher Eisenhüttenleute (VDEh), 2000
Franzke, M.
Harabasz, W.
Stein, G.
[Dissertation / PhD Thesis]
Zielgrößenadaptierte Netzdiagnose und -generierung zur Anwendung der Finite-Element-Methode in der Umformtechnik, 1999
Franzke, Martin
[Journal Article]
Steel strip production - a pilot application for coupled simulation with several calculation systems
In: Journal of materials processing technology, 80-1, 330-336, 1998
[DOI: 10.1016/S0924-0136(98)00129-0]
Adamidis, P.
Beck, A.
Becker-Lemgau, U.
Ding, Y.
Franzke, M.
et al.
[Contribution to a book]
Numerical simulation of metal-forming processes
In: MSMM 96, Beijing, Juli 1996, 1996
Kopp, Reiner
Franzke, Martin
Koch, M.
Heußen, J. M. M.
Bernrath, G.
[Contribution to a conference proceedings]
Dreidimensionale FEM-Simulation in der Massivumformung
In: 16. Sem. Nac. de Forjamento, Porto Alegre, 30. Sept. 1996, 1996
Franzke, Martin
Koch, M.
Bernrath, G.
Kopp, Reiner
[Contribution to a conference proceedings, Journal Article]
Ein innovatives Verfahren zum Schmieden großer Kurbelwellen“
In: Stahl und Eisen, 114 (7), 21-26, 1994
Bokelmann, D.
Kopp, R.
Fleischer, M.
Franzke, Martin
[Contribution to a book]
Prozeßsimulation in der Umformtechnik
In: Forum Informat. Jber., 1994
Kopp, R.
Franzke, M.
Bünten, R.
[Book]
Optimierung der Fertigung von Kurbelwellen : Abschl.ber. z. MWMT-Forsch.vorhaben 334-88-26.3, 1994
Kopp, R.
Fleischer, M.
Franzke, M.
[Contribution to a conference proceedings]
Analysis of changes in surface appearance of metals during forming operations
In: FEM-Kongr. Baden-Baden 1994, 1994
Kopp, R.
Bünten, R.
Franzke, M.
[Contribution to a conference proceedings]
Dreidimensionale FEM-Simulation mit Netzgenerierung im industriellen Einsatz
In: Konf. z. Simulat. v. Umformprozessen in d. Ind. Baden-Baden 1994, Tagg.bd., 1994
Kopp, R.
Franzke, M.
Bünten, R.
Fleischer, M.
Karhausen, K.
et al.
[Contribution to a conference proceedings]
Notwendigkeit von numerischer und experimenteller Simulation
In: Sächs. Fachtagg. Umformtech. Chemnitz 1994, Tagg.bd., 1994
Kopp, R.
Franzke, M.
Westphal, K.
[Contribution to a conference proceedings]
Innovation und Kooperation
In: Hochschul-Computer-Forum. Berlin 1994, 1994
Kopp, R.
Franzke, M.
Thomas, R.