Person

Dr.-Ing., Universitätsprofessor

Gerhard Hirt

Head of the Institute

Institute of Metal Forming

Address

Room: 008

Intzestraße 10

52072 Aachen

Contact

workPhone
Phone: +49 241 80 95907
Fax: +49 241 80 92378
 

Publications

Title Author(s)
Model Predictive Roll Gap Control in Cold Rolling with Piezoelectric Actuators
Contribution to a book, Contribution to a conference proceedings (2018)
Wehr, Matthias Ludwig
Stockert, Sven Matthias
Abel, Dirk
Hirt, Gerhard Kurt Peter
Near-net shape open-die forming of complex workpieces through superimposed manipulator displacements
Contribution to a conference proceedings (2018)
Wolfgarten, Martin Christoph
Hirt, Gerhard Kurt Peter
SFB 761 Stahl - ab initio: Prozessentwicklung für hoch Mangan Stähle
Contribution to a conference proceedings (2018)
Kurenbach, Svenja
Quadfasel, Angela
Brasche, Frederike Lina
Haupt, Marco
Haase, Christian
et al.
Modellierung von Produkteigenschaften beim Walzen – Zielgrößengerechte Modellauswahl für Mikrostruktur, Textur und Oberfläche
Contribution to a conference proceedings (2018)
Hirt, Gerhard Kurt Peter
Hojda, Stephan
Krämer, Alexander Maximilian
Wei, Xuefei
Industrial Application Potential of Incremental Sheet Forming”
Contribution to a conference proceedings (2018)
Schmitz, Roman Ulrich Christopher
Hirt, Gerhard Kurt Peter
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
Contribution to a book, Contribution to a conference proceedings (2018)
Teller, Marco
Roß, Ingo
Prünte, Stephan
Temmler, André
Küpper, Moritz Emanuel
et al.
Prozessgrenzen beim Walzplattieren besser verstehen
Journal Article (2018)
Simon, Paul
Melzner, Alina
Hirt, Gerhard Kurt Peter
Schnelle Karosserien
Journal Article (2018)
Schmitz, Roman Ulrich Christopher
Hirt, Gerhard Kurt Peter
Interdisciplinary Data Driven Production Process Analysis for the Internet of Production
Contribution to a book, Contribution to a conference proceedings (2018)
Meyes, Richard
Tercan, Hasan
Thiele, Thomas David
Krämer, Alexander Maximilian
Heinisch, Julian
et al.
Investigation of correlation between material properties, process parameters and residual stresses in roller levelling
Contribution to a book, Contribution to a conference proceedings (2018)
Grüber, Markus
Hirt, Gerhard Kurt Peter
Finite elemente analysis of caliber rolling processes to investigate possiblities to influence the damage evolution
Contribution to a conference proceedings (2018)
wang, Shuhan
Pöplau, Julia
Grüber, Markus
Hirt, Gerhard Kurt Peter
Numerical investigation on damage evolution and void closure in hot flat rolling
Contribution to a conference proceedings (2018)
Liebsch, Conrad
Hirt, Gerhard Kurt Peter
Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Test
Contribution to a book, Journal Article (2018)
Teller, Marco
Ross, Ingo
Temmler, André
Poprawe, Reinhart
Prünte, Stephan
et al.
A New Coupled Thermal Stress FE-Model for Investigating the Influence of Non-Isothermal Conditions on Bond Strength and Bonding Status of the First Pass in Roll Bonding
Contribution to a book, Journal Article (2018)
Liu, Zhao
Krämer, Alexander Maximilian
Karhausen, Kai-Friedrich
Aretz, Holger
Teller, Marco
et al.
Improving the thickness accuracy of cold rolled narrow strip by piezoelectric roll gap control at high rolling speed
Journal Article (2018)
Stockert, Sven Matthias
Wehr, Matthias Ludwig
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Abel, Dirk
From lab to application : Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns
Journal Article (2018)
Grützmacher, Philipp G.
Rosenkranz, Andreas
Szurdak, Adam
König, Florian
Jacobs, Georg
et al.
Evaluation of interlocking bond strength between structured 1.0338 steel sheets and high pressure die cast AlMg5Si2
Contribution to a book, Contribution to a conference proceedings (2018)
Senge, Stefan
Brachmann, J.
Hirt, G.
Bührig-Polaczek, A.
Homogenisation of the strain distribution in stretch formed parts to improve part properties
Contribution to a book, Contribution to a conference proceedings (2018)
Schmitz, Roman Ulrich Christopher
Winkelmann, Mike
Bailly, David Benjamin
Hirt, Gerhard Kurt Peter
Cold rolling of coated steel sheets as pretreatment for hybrid components
Contribution to a book, Contribution to a conference proceedings (2018)
Senge, Stefan
Gerdt, Leonid
Wiesner, Stefanie
Öte, Mehmet
Bobzin, Kirsten
et al.
Lubricant migration on stainless steel induced by bio-inspired multi-scale surface patterns
Journal Article (2018)
Grützmacher, Philipp G.
Rosenkranz, Andreas
Szurdak, Adam
Gachot, Carsten
Hirt, Gerhard Kurt Peter
et al.
Effects of Multi‐Scale Patterning on the Run‐In Behavior of Steel-Alumina Pairings under Lubricated Conditions
Journal Article (2017)
Grützmacher, Philipp G.
Rosenkranz, Andreas
Szurdak, Adam
Gachot, Carsten
Hirt, Gerhard Kurt Peter
et al.
Near-net shape open-die forging of complex workpieces through superimposed manipulator displacements
Contribution to a conference proceedings (2018)
Wolfgarten, Martin Christoph
Hirt, Gerhard Kurt Peter
Einfluss des Handpolierens von Probenkörpern auf Gestaltabweichungen erster Ordnung und das Verschleißverhalten in Tribometerversuchen
Journal Article (2018)
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Küpper, Moritz
Temmler, André
et al.
Guiding lubricant on stainless steel surfaces by channel-like structures fabricated by roller- and micro-coining
Journal Article (2018)
Grützmacher, Philipp G.
Rosenkranz, Andreas
Atalay, Emre
Szurdak, Adam
Gachot, Carsten
et al.
Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel
Journal Article (2017)
Leuning, Nora
Steentjes, Simon
Stöcker, Anett
Kawalla, Rudolf
Wei, Xuefei
et al.
Friction Reduction Induced by Elliptical Surface Patterns under Lubricated Conditions
Journal Article (2017)
Rosenkranz, Andreas
Szurdak, Adam
Grützmacher, Philipp G.
Hirt, Gerhard Kurt Peter
Mücklich, Frank
Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging
Journal Article (2017)
Laugwitz, Marvin
Voswinckel, H.
Hirt, Gerhard Kurt Peter
Bambach, M.
Reparaturstrategie für automobile CFK-Strukturbauteile
Contribution to a book, Contribution to a conference proceedings (2017)
Bier, Stefanie
Schoft, Julia
Schiebahn, Alexander
Reisgen, Uwe Kaspar
Hirt, Gerhard Kurt Peter
et al.
Process integrated production of complex workpieces in open-die forging
Contribution to a conference proceedings (2017)
Wolfgarten, Martin Christoph
Hibbe, Paul
Hirt, Gerhard Kurt Peter
Modelling of microstructure and damage in ring rolling
Contribution to a conference proceedings (2017)
Schwich, Gideon Michael
Seitz, Joachim Friedhelm
Guenther, Stefan
Hirt, Gerhard Kurt Peter
Flatness characterisation of hot plates for plate levelling
Contribution to a book, Contribution to a conference proceedings (2017)
Laugwitz, Marvin
Seuren, Simon
Jochum, M.
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
A feed-forward control for roller levelers using FE based process models and fast meta-models
Contribution to a book, Contribution to a conference proceedings (2017)
Grüber, Markus
Oligschäger, Marius
Hirt, Gerhard Kurt Peter
Integrated Computational Materials and Production Engineering (ICMPE)
Contribution to a book (2017)
Bleck, Wolfgang Peter
Brecher, Christian
Herty, Michael Matthias
Hirt, Gerhard Kurt Peter
Hopmann, Christian
et al.
Multi-technology Platforms (MTPs)
Contribution to a book (2017)
Brecher, Christian
Bleck, Wolfgang Peter
Feldhusen, Jörg
Hirt, Gerhard Kurt Peter
Klocke, Fritz
et al.
Wear behavior of micro-coined steel surfaces under mixed lubrication
Journal Article (2017)
Rosenkranz, Andreas
Khan, Saad Ahmed
Szurdak, Adam
Hirt, Gerhard Kurt Peter
Gachot, Carsten
Remeshing framework for a multiphysics FEM solver exemplified by a dmage sensitive extrusion process
Contribution to a conference proceedings (2017)
Hojda, Stephan
Sturm, Karl J. X.
Teller, Marco
Hirt, Gerhard Kurt Peter
Impact of the Interaction of Material Production and Mechanical Processing on the Magnetic Properties of Non-oriented Electrical Steel
Abstract, Contribution to a conference proceedings (2017)
Hameyer, Kay
Leuning, Nora
Steentjes, Simon
Stöcker, Anett
Kawalla, Rudolf
et al.
Development of levelling strategies for heavy plates via controlled FE models
Contribution to a book, Contribution to a conference proceedings (2017)
Laugwitz, Marvin
Seuren, Simon
Jochum, Martin
Hojda, Stephan
Lohmar, Johannes
et al.
Numerical and experimental investigations on the springback behaviour of stamping and bending parts
Contribution to a book, Contribution to a conference proceedings (2017)
Mertin, Chris Frederic
Hirt, Gerhard Kurt Peter
A strategy for the controlled setting of flatness and residual stress distribution in sheet metals via roller levelling
Contribution to a book, Contribution to a conference proceedings (2017)
Grüber, Markus
Hirt, Gerhard Kurt Peter
Investigations on Springback in High Manganese TWIP-Steels using U-Profile Draw Bending
Contribution to a book, Contribution to a conference proceedings (2017)
Quadfasel, Angela
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Increasing the energy absorption capacity of structural components made of low alloy steel by combining strain hardening and local heat treatment
Contribution to a book, Contribution to a conference proceedings (2017)
Conrads, Laura
Liebsch, Conrad
Hirt, Gerhard Kurt Peter
Investigation of a composite ring rolling process considering bonding behaviour in FEM and experiment
Contribution to a book, Contribution to a conference proceedings (2017)
Guenther, Stefan
Seitz, Joachim Friedhelm
Schwich, Gideon Michael
Hirt, Gerhard Kurt Peter
Damage dependent material properties in a Finite Element Simulation of a hybrid forward extrusion process
Contribution to a book, Contribution to a conference proceedings (2017)
Hojda, Stephan
Sturm, Karl J. X.
Terhorst, Michael
Klocke, Fritz
Hirt, Gerhard Kurt Peter
Influence of Intercritical Annealing on Microstructure and Mechanical Properties of a Medium Manganese Steel
Contribution to a book, Contribution to a conference proceedings (2017)
Haupt, Marco
Dutta, Aniruddha
Ponge, Dirk
Sandlöbes, Stefanie
Nellessen, Monika
et al.
Online-coupled FE simulation and microstructure prediction for the process chain of an Inconel 718 turbine disk
Contribution to a book, Contribution to a conference proceedings (2017)
Krämer, Alexander
Rabindran, Rajeevan
Rott, Anna
Kumar, Ranjett
Hirt, Gerhard Kurt Peter
Investigations on the Elongation Differences of Aluminum in Two Layer Roll Bonding
Contribution to a book, Contribution to a conference proceedings (2017)
Melzner, Alina
Hirt, Gerhard Kurt Peter
Assessment of Flat Rolling Theories for the Use in a Model-Based Controller for High-Precision Rolling Applications
Contribution to a book, Contribution to a conference proceedings (2017)
Stockert, Sven Matthias
Wehr, Matthias Ludwig
Lohmar, Johannes
Abel, Dirk
Hirt, Gerhard Kurt Peter
Interlocking Multi-Material Components made of Structured Steel Sheets and High-Pressure Die Cast Aluminium
Contribution to a book, Contribution to a conference proceedings (2017)
Senge, Stefan
Brachmann, Johannes
Hirt, Gerhard Kurt Peter
Bührig-Polaczek, Andreas
Influence of transient strain rates on material flow stress and microstructure evolution
Contribution to a book, Contribution to a conference proceedings (2017)
Dierdorf, Jens
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Tribological investigations of the applicability of surface functionalization for dry extrusion processes
Contribution to a book, Contribution to a conference proceedings (2017)
Teller, Marco
Prünte, Stephan
Ross, Ingo
Temmler, André
Schneider, Jochen Michael
et al.
Model for texture evolution in cold rolling of 2.4 wt.-% Si non-oriented electrical steel
Contribution to a book, Contribution to a conference proceedings (2017)
Wei, Xuefei
Hojda, Stephan
Dierdorf, Jens
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Profitability Assessment as a Contribution to the Theory of Production
Contribution to a book (2017)
Brecher, Christian
Hirt, Gerhard Kurt Peter
Klocke, Fritz
Reisgen, Uwe
Conrads, Laura
et al.
Controllable friction in lubricated systems by a multi-scale approach combining direct laser interference patterning and micro-coining
Contribution to a book, Contribution to a conference proceedings (2017)
Grützmacher, P.
Szurdak, Adam
Rosenkranz, Andreas
Grüber, Markus
Hirt, Gerhard Kurt Peter
et al.
Investigation on the cold rolling and structuring of cold sprayed copper-coated steel sheets
Contribution to a book, Contribution to a conference proceedings (2017)
Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Gerdt, Leonid
Senge, Stefan
et al.
Investigation on the cold rolling and structuring of cold sprayed copper-coated steel sheets
Contribution to a book, Contribution to a conference proceedings (2017)
Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Gerdt, Leonid
Senge, Stefan
et al.
Hochpräzises Walzen durch Integration piezoelektrischer Stapelaktoren : Vorstellung des Automatisierungskonzeptes, der Regelung und erster Walzergebnisse in einem Hochpräzisionswalzwerk zur Herstellung von dünnen, metallischen Bändern
Contribution to a book, Contribution to a conference proceedings (2017)
Wehr, Matthias Ludwig
Stockert, Sven Matthias
Abel, Dirk
Hirt, Gerhard Kurt Peter
Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
Journal Article (2017)
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Temmler, André
Poprawe, Reinhart
et al.
Improvement of the dishing process in ring rolling using conical guide rolls
Journal Article (2017)
Seitz, Joachim Friedhelm
Kordtomeikel, Frauke
Hirt, Gerhard Kurt Peter
On the growth of intermetallic phases by heat treatment of friction stir welded aluminum steel joints
Journal Article (2017)
Naumov, Andreas
Mertin, Chris
Korte, Frederik
Hirt, Gerhard Kurt Peter
Reisgen, Uwe
Decreasing friction during Al cold forming using a nanomolecular layer
Journal Article (2017)
Prünte, Stephan
Music, Denis
Schneider, Jochen Michael
Teller, Marco
Hirt, Gerhard Kurt Peter
et al.
Demonstrator Conductive Friction Stir Welding (FSW) Center
Contribution to a book (2017)
Hirt, Gerhard Kurt Peter
Reisgen, Uwe
Bleck, Wolfgang
Bambach, Markus
Schiebahn, Alexander
et al.
Demonstrator Hybrid Sheet Metal Processing Center
Contribution to a book (2017)
Bleck, Wolfgang
Bailly, David Benjamin
Bambach, Markus
Conrads, Laura
Göttmann, Alexander
et al.
Processing of Clad Steel Strips Consisting of a High Manganese and Stainless Steel Pairing Produced by Twin-Roll Casting
Journal Article (2016)
Münster, Dennis
Zhang, Bowen
Hirt, Gerhard Kurt Peter
Krumme Dinger mittels Freiformschmieden
Journal Article (2016)
Wolfgarten, Martin Christoph
Hibbe, Paul
Hirt, Gerhard Kurt Peter
Rapid Control Prototyping in Cold Rolling using Piezoelectric Actuators
Contribution to a conference proceedings, Journal Article (2016)
Wehr, Matthias Ludwig
Stockert, Sven Matthias
Abel, Dirk
Hirt, Gerhard Kurt Peter
Investigation of Springback of High Manganese TWIP-Steels Using Three-Point-Bending
Contribution to a book, Contribution to a conference proceedings (2016)
Quadfasel, Angela
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Investigation of a Production Route for Medium Manganese High Strength Steels Based on Twin-Roll Strip Casting
Contribution to a book, Contribution to a conference proceedings (2016)
Haupt, Marco
Daamen, Markus
Offermanns, Nico
Hirt, Gerhard Kurt Peter
Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen
Journal Article (2016)
Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Poprawe, Reinhart
Prünte, Stephan
Self-Supporting Free-Form Structures Made of Individual Sheet Metal Panels
Contribution to a book, Contribution to a conference proceedings (2016)
Pofahl, Thorsten
Bailly, David Benjamin
Schmitz, Roman Ulrich Christopher
Trautz, Martin
Hirt, Gerhard Kurt Peter
Low-loss FeSi sheet for energy-efficient electrical drives
Contribution to a conference proceedings (2016)
Kawalla, Rudolf
Stöcker, Anett
Grigoleit, Jens
Wei, Xuefei
Dierdorf, Jens
et al.
Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment
Contribution to a book, Contribution to a conference proceedings (2016)
Conrads, Laura
Daamen, Markus
Hirt, Gerhard Kurt Peter
Bambach, M.
Microstructure and damage calculation in ring rolling
Contribution to a conference proceedings (2016)
Schwich, Gideon
Rabindran, Rajeevan
Seitz, Joachim Friedhelm
Hirt, Gerhard Kurt Peter
Enhancing the crashworthiness of high-manganese steel by strain-hardening engineering, and tailored folding by local heat-treatment
Journal Article (2016)
Bambach, Markus
Conrads, Laura
Daamen, Markus
Güvenc, Onur
Hirt, Gerhard Kurt Peter
Closed-loop control of product properties in metal forming
Contribution to a conference proceedings, Journal Article (2016)
Allwood, J. M.
Duncan, S. R.
Cao, J.
Groche, P.
Hirt, Gerhard Kurt Peter
et al.
Synergetic effect of laser patterning and micro coining for controlled lubricant propagation
Journal Article (2016)
Rosenkranz, Andreas
Gruetzmacher, Philipp G.
Szurdak, Adam
Gachot, Carsten
Hirt, Gerhard Kurt Peter
et al.
Investigation on Hardening and Softening Behavior of Steel after Rapid Strain Rate Changes
Contribution to a book, Journal Article (2016)
Dierdorf, Jens
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions
Contribution to a book, Contribution to a conference proceedings, Journal Article (2016)
Teller, Marco
Klubakov, Alexej
Franzke, Martin
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Investigation of a composite ring rolling process by FEM and experiment
Contribution to a book, Contribution to a conference proceedings (2016)
Seitz, Joachim
Schwich, Gideon
Guenther, Stefan
Hirt, Gerhard Kurt Peter
Influence of die geometry and material selection on the behavior of protective die covers in closed-die forging
Contribution to a book, Contribution to a conference proceedings (2016)
Yu, Yingyan
Rosenstock, Dirk
Wolfgarten, Martin Christoph
Hirt, Gerhard Kurt Peter
On the impact of rolling direction and tool orientation angle in Rotary Peen Forming
Contribution to a book, Contribution to a conference proceedings (2016)
Gottschalk, Markus
Hirt, Gerhard Kurt Peter
Realistic modelling of the tool kinematics of radial-axial ring rolling machines in finite element simulation
Contribution to a book, Contribution to a conference proceedings (2016)
Schwich, Gideon
Jenkouk, Vahid
Hirt, Gerhard Kurt Peter
Inverse modelling approach in 3-point bending for elasto- plastic material parameter identification of thin spring steel
Contribution to a book, Contribution to a conference proceedings (2016)
Mertin, Chris
Huse, K.
Hirt, Gerhard Kurt Peter
Precise Prediction of Microstructure Properties with Minimal Experimental Effort for the Nickel-Base Alloy Inconel 718
Contribution to a book, Contribution to a conference proceedings (2016)
Krämer, Alexander
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Development of a Laser Triangulation Gauge for High Precision Strip Thickness Control
Contribution to a book, Contribution to a conference proceedings (2016)
Stockert, Sven
Wehr, Matthias
Lohmar, Johannes
Hirt, Gerhard Kurt Peter
Abel, Dirk
Virtueller Einblick für den Schmied
Journal Article (2016)
Hirt, Gerhard Kurt Peter
Krämer, Alexander
Wolfgarten, Martin Christoph
Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment
Contribution to a conference proceedings (2016)
Conrads, Laura
Daamen, Markus
Hirt, Gerhard
Bambach, Markus
New method for the manufacturing of curved workpieces by open-die forging
Journal Article (2016)
Wolfgarten, Martin
Hirt, Gerhard
Ideen Form geben
Contribution to a book, Contribution to a conference proceedings (2016)
Hirt, Gerhard
Flexible Blechbearbeitung für kleine Stückzahlen
Contribution to a book, Contribution to a conference proceedings (2016)
Conrads, Laura
Bailly, David
Laugwitz, Marvin
Hirt, Gerhard
Prozessnahe Charakterisierung von innovativen Oberflächen für das Trockenumformen
Contribution to a book, Contribution to a conference proceedings (2016)
Teller, Marco
Roeder, Roman
Hirt, Gerhard
Verbesserte Werkstoffcharakterisierung für die Warmblechumformung durch Hot-Gas-Bulgetests
Contribution to a book, Contribution to a conference proceedings (2016)
Braun, Alexander
Hirt, Gerhard
Waerder, Maximilian
Simulation des Nachwalzens von Aluminiumband für die Automobilindustrie
Contribution to a book, Contribution to a conference proceedings (2016)
Hojda, Stephan
Kang, Wenyi
Wang, Yuwei
Hirt, Gerhard
Vogd, Matthias
Freiformschmieden gekrümmter Bauteile durch überlagerte Manipulatorbewegungen
Contribution to a book, Contribution to a conference proceedings (2016)
Wolfgarten, Martin Christoph
Rosenstock, Dirk
Hirt, Gerhard
Schäfer, Hanno
Schwarz, Reinhard
Numercial investigation into aluminium skin pass rolling
Contribution to a book, Contribution to a conference proceedings (2016)
Hojda, Stephan
Vogd, Matthias
Kang, Wenyi
Pawelski, Hartmut
Hirt, Gerhard
Experimental investigation into aluminium skin pass rolling
Contribution to a book, Contribution to a conference proceedings (2016)
Vogd, Matthias
Hojda, Stephan
Wengenroth, Walter
Pawelski, Hartmut
Hirt, Gerhard
Crystal plasticity finite element analysis of texture evolution during could rolling of a non-oriented electrical steel
Contribution to a book, Contribution to a conference proceedings (2016)
Wei, Xuefei
Hojda, Stephan
Dierdorf, Jens
Lohmar, Johannes
Hirt, Gerhard
Effect of the Interdependence of Cold Rolling Strategies and Subsequent Punching on Magnetic Properties of NO Steel Sheets
Journal Article (2016)
Steentjes, Simon
Leuning, Nora
Dierdorf, Jens
Wei, Xuefei
Hirt, Gerhard
et al.
Inkrementelles Umformen wirtschaftlich gemacht
Journal Article (2016)
Schmitz, Roman Ulrich Christopher
Hirt, Gerhard
Numerical Investigation of a Process Control for the Roller Levelling Process Based on a Force Measurement
Contribution to a book, Contribution to a conference proceedings, Journal Article (2016)
Grüber, Markus
Hirt, Gerhard
A New FE-Model for the Investigation of Bond Formation and Failure in Roll Bonding Processes
Contribution to a book, Contribution to a conference proceedings, Journal Article (2016)
Pietryga, Michael P.
Lohmar, Johannes
Hirt, Gerhard
Effects of Process Parameter Variation on the Bonding Strength in Clad Steel Strips by Twin-Roll Strip Casting
Contribution to a book, Contribution to a conference proceedings, Journal Article (2016)
Münster, Dennis
Vidoni, Michele
Hirt, Gerhard
Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband
Book, Proceedings (2016)
Hirt, Gerhard
Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns
Journal Article (2015)
Rosenkranz, Andreas
Szurdak, Adam
Gachot, Carsten
Hirt, Gerhard
Mücklich, Frank
Using Data Sampling and Inverse Optimization for the Reduction of the Experimental Effort in the Characterization of Hot Working Behaviour for a Case Hardening Steel
Contribution to a book, Contribution to a conference proceedings (2015)
Krämer, Alexander M.
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard Kurt Peter
Metal forming beyond shaping: Predicting and setting product properties
Journal Article (2015)
Tekkaya, A. E.
Allwood, J. M.
Bariani, P. F.
Bruschi, S.
Cao, J.
et al.
Integrated Technologies
Contribution to a book (2015)
Lauwers, Bert
Hirt, Gerhard Kurt Peter
Hopmann, Christian
Windeck, Christian
Numerical and Experimental Investigation of a Modified Twin Roll Strip Casting Process for the Production of Clad Steel Strips
Contribution to a book, Contribution to a conference proceedings, Journal Article (2015)
Vidoni, Michele
Daamen, Markus
Hirt, Gerhard Kurt Peter
Development of a gas based bulge test for the determination of flow curves for hot sheet metal forming processes
Contribution to a conference proceedings (2015)
Braun, Alexander
Storz, Johannes
Hirt, Gerhard
The inverse determination of material parameters for hot plate rolling exclusively from rolling mill data
Contribution to a book, Contribution to a conference proceedings (2015)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Seuren, Simon
Hybrid Sheet Metal Processing Center
Contribution to a book (2015)
Bailly, David
Conrads, Laura
Hirt, Gerhard
Investigation on the Producibility of Freeform Facade Elements of Sheet Metal as Self-Supporting Structures by Means of Incremental Sheet Forming
Contribution to a conference proceedings (2015)
Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Della Puppa, Giovanni
et al.
Leichtwerkstoffe umformen ohne teure Tools
Journal Article (2015)
Conrads, Laura
Hirt, Gerhard
Streckziehen kombiniert mit inkrementeller Blechumformung - Von der Geometrie zum fertigen Bauteil
Journal Article (2015)
Conrads, Laura
Hirt, Gerhard
Multilayered metal panels for doubly curved freeform shell structures
Contribution to a book, Contribution to a conference proceedings (2015)
Della Puppa, Giovanni
Pofahl, Thorsten
Trautz, Martin
Bailly, David
Hirt, Gerhard
Virtual Production Systems
Contribution to a book (2015)
Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Schulz, Wolfgang
A new method to determine isothermal flow curves for integrated process and microstructural simulation in metal forming
Journal Article (2013)
Xiong, Wei
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium
Journal Article (2015)
Roß, Ingo
Temmler, André
Poprawe, Reinhart
Teller, Marco
Hirt, Gerhard
et al.
Continuous Process Chain Modeling of low-loss FeSi Sheet for Energy-efficient Electrical Drives
Journal Article (2015)
Leuning, Nora
Steentjes, Simon
Dierdorf, Jens
Wei, Xuefei
Hirt, Gerhard
et al.
Effect of the interdependence of cold-rolling strategies and subsequent cutting on the magnetic properties of electrical steel sheets
Contribution to a conference proceedings (2015)
Kurpat, Thorsten
Steentjes, Simon
Hameyer, Kay
Dierdorf, Jens
Wei, Xuefei
et al.
Methodik zur Entwicklung von interaktionsminimierten Oberflächenschichten für das schmiermittelfreie Kaltfließpressen von Aluminium
Journal Article (2015)
Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
Bandgießen individueller Blechhalbzeuge
Journal Article (2015)
Münster, Dennis
Vidoni, Michele
Hirt, Gerhard
Das integrierte Blechbearbeitungszentrum
Journal Article (2015)
Gottschalk, Markus
Bailly, David Benjamin
Hirt, Gerhard Kurt Peter
Trockene Tribosysteme prozessnah beschreiben
Journal Article (2015)
Teller, Marco
Hirt, Gerhard
Untersuchung zur Herstellung gekrümmter Bauteile beim Freiformschmieden durch überlagerte Biegespannungen
Journal Article (2015)
Wolfgarten, Martin
Rosenstock, Dirk
Hirt, Gerhard
Forging process layout using design of experiments combined with a response surface model
Contribution to a conference proceedings (2015)
Dierdorf, J.
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Evaluation of Modular Roll-Setup to Roll Grooves into Steel Sheets
Contribution to a book (2015)
Senge, Stefan
Hirt, Gerhard
Development and experimental verification of a new roller-coining setup to texture flat and curved surfaces
Contribution to a book (2015)
Szurdak, Adam
Hirt, Gerhard
Robot Controlled Rotary Peen Forming by Laser-Assisted Distance Control
Journal Article (2015)
Gottschalk, Markus
Bambach, Markus
Hirt, Gerhard Kurt Peter
A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium
Journal Article (2015)
Teller, Marco
Bambach, Markus
Hirt, Gerhard
Implementation of an open-die forging process for large hollow shafts for wind power plants with respect to an optimized microstructure
Journal Article (2015)
Wolfgarten, Martin
Rosenstock, Dirk
Schaeffer, Lirio
Hirt, Gerhard
Production of Clad Steel Strips by Twin-Roll Strip Casting
Journal Article (2015)
Vidoni, Michele
Ackermann, Rebecca
Richter, Silvia
Hirt, Gerhard
Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing
Journal Article (2015)
Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.
Determination of thermal boundary conditions for modeling the hot roll bonding process
Journal Article (2015)
Melzner, Alina
Hirt, Gerhard
The Effect of the Initial Stress and Strain State in Sheet Metals on the Roller Levelling Process
Journal Article (2015)
Grüber, Markus
Oligschläger, Marius
Hirt, Gerhard
Using data sampling and inverse optimization for the reduction of the experimental effort in the characterization of hot working behavior for a case hardening steel
Journal Article (2015)
Krämer, Alexander
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
First Experimental and Numerical Study on the Use of Sheet Metal Die Covers for Wear Protection in Closed-die Forging
Journal Article (2015)
Rosenstock, Dirk
Segebade, Eric Thore
Hirt, Gerhard
Improving Geometrical Accuracy for Flanging by Incremental Sheet Metal Forming
Journal Article (2014)
Voswinckel, Holger
Bambach, Markus
Hirt, Gerhard
Designing new forging steels by ICMPE
Contribution to a book, Contribution to a conference proceedings (2015)
Bleck, Wolfgang
Prahl, Ulrich
Hirt, Gerhard
Bambach, Markus
Experimental and Numerical Investigation on Controlling the Material Flow in Open-die Forging through Superimposed Manipulator Displacement
Contribution to a book, Contribution to a conference proceedings, Journal Article (2015)
Wolfgarten, Martin
Rosenstock, Dirk
Freitag, Jan
Hirt, Gerhard
Flexible Manufacturing of Double-Curved Sheet Metal Panels for the Realization of Self-Supporting Freeform Structures
Contribution to a book, Contribution to a conference proceedings, Journal Article (2015)
Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Della Puppa, Giovanni
et al.
Finite Element Analysis of Manufacturing Micro Lubrication Pockets in High Strength Steels by Hot Micro-Coining
Journal Article (2015)
Szurdak, Adam
Hirt, Gerhard
Twin-roll strip casting : a competitive alternative for the production of high-manganese steels with advanced mechanical properties
Journal Article (2015)
Daamen, Markus
Haase, Christian
Dierdorf, Jens
Molodov, Dmitri A.
Hirt, Gerhard
Materials modelling in industrial bulk metal forming processes and process chains
Journal Article (2015)
Hirt, Gerhard
Bambach, Markus
Lohmar, Johannes
Güvenc, Onur
Henke, Thomas
et al.
The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts
Contribution to a book (2015)
Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Stollenwerk, Jochen Hugo
Recent Investigations on Shot Peen Forming of GLARE Sheets and Rotary Peen Forming
Contribution to a book, Contribution to a conference proceedings (2014)
Russig, Christoph
Gottschalk, Markus
Bambach, Markus
Hirt, Gerhard Kurt Peter
Fast and Accurate Force Prediction for High Quality Heavy Plates by A State Of The Art Rolling Model Calibrated From Mill Data via Inverse Techniques
Contribution to a conference proceedings (2014)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard Kurt Peter
Kiefer, T.
Kotliba, D.
et al.
Untersuchungen zur Herstellbarkeit von frei geformten Hüll- und Fassadenelementen als selbsttragende Struktur ohne Unterkonstruktion aus nichtrostendem Stahl mittels inkrementeller Blechumformung (IBU)
Book, Report (2014)
Hirt, Gerhard
Heise, Franz-Josef
Bambach, Markus
Bailly, David
Trautz, Martin
et al.
A new concept for freeform shell structures composed of doublycurvedmultilayered panels
Contribution to a conference proceedings (2014)
Pofahl, Thorsten
Della Puppa, Giovanni
Trautz, Martin
Bailly, David
Hirt, Gerhard
A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation
Contribution to a conference proceedings, Journal Article (2014)
Teller, Marco
Seuren, Simon
Bambach, Markus
Hirt, Gerhard
Strip casting and ingot casting : comparison of different cooling conditions regarding the as-cast quality
Contribution to a book, Contribution to a conference proceedings (2014)
Daamen, Markus
von Schweinichen, Petrico
Richter, Silvia
Hirt, Gerhard
Senk, Dieter
The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques
Journal Article (2014)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Kiefer, Thomas
Kotliba, Daniel
Shot peen forming of fiber metal laminates on the example of GLARE®
Journal Article (2014)
Russig, Christoph
Bambach, Markus
Hirt, Gerhard
A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming
Contribution to a book, Contribution to a conference proceedings (2014)
Bambach, Markus
Voswinckel, Holger
Hirt, Gerhard
Selected Processes and Modeling Techniques for Rolled Products
Contribution to a book, Contribution to a conference proceedings (2014)
Hirt, Gerhard
Senge, Stefan
Deformation Behavior of High-manganese TWIP Steels Produced by Twin-roll Strip Casting
Contribution to a book, Contribution to a conference proceedings (2014)
Daamen, Markus
Nessen, Wiebke
Pinard, Philippe T.
Richter, Silvia
Schwedt, Alexander
et al.
Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel
Contribution to a book, Contribution to a conference proceedings (2014)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
On the Effect of Material Processing : Microstructural and Magnetic Properties of Electrical Steel Sheets
Contribution to a book, Contribution to a conference proceedings (2014)
Steentjes, Simon
Franck, David Andre
Hameyer, Kay
Vogt, S.
Bednarz, M.
et al.
Near Net Shape Production of Baseflages by Radial-Axial Ring Rolling
Contribution to a conference proceedings (2014)
Seitz, Joachim Friedhelm
Schwich, Gideon Michael
Jenkouk, Vahid
Hirt, Gerhard Kurt Peter
Online Analysis of Cogging Processes : Evaluation of the Equivalent Strain, Temperature and Grain Size Distribution
Contribution to a conference proceedings (2014)
Rosenstock, Dirk
Recker, Dominik
Hirt, Gerhard Kurt Peter
Hot rolling of AISI 304 tailored strips procuced by twin roll strip casting
Journal Article (2014)
Vidoni, Michele
Daamen, Markus
Gastreich, Jan
Offermanns, Nico
Hirt, Gerhard
Online Visualization during Open Die Forging and Optimization of Pass Schedules
Journal Article (2014)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
Process and materials modelling in incremental bulk metal forming
Contribution to a book, Contribution to a conference proceedings (2014)
Hirt, Gerhard Kurt Peter
Lohmar, Johannes
Rosenstock, Dirk
Seitz, Joachim Friedhelm
Prediction of microstructure and resulting rolling forces by application of a material model in a hot ring rolling process
Contribution to a book, Contribution to a conference proceedings, Journal Article (2014)
Schwich, Gideon
Henke, Thomas
Seitz, Joachim
Hirt, Gerhard
Analysis into differences between the buckling in single-point and two-point incremental sheet forming of components for self-supporting sheet metal structures
Contribution to a book, Contribution to a conference proceedings, Journal Article (2014)
Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Herkrath, Ralf
et al.
Manufacturing of Innovative Self-Supporting Sheet-Metal Structures Representing Freeform Surfaces
Contribution to a conference proceedings (2014)
Bailly, David
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten
Herkrath, Ralf
et al.
Development of a pneumatic bulge test for high temperatures and controlled strain rates
Contribution to a book, Contribution to a conference proceedings (2014)
Braun, Alexander
Storz, Johannes
Bambach, Markus
Hirt, Gerhard
Adjusting of Roller Levellers by Finite Element Simulations Including a Closed-loop Control
Contribution to a book, Contribution to a conference proceedings (2014)
Grüber, Markus
Oligschläger, Marius
Hirt, Gerhard
A cohesive zone model for simulation of the bonding and debonding in metallic composite structures - experimental validations
Contribution to a book, Contribution to a conference proceedings, Journal Article (2014)
Kebriaei, Reza
Mikloweit, Alexander
Vladimirov, Ivaylo N.
Bambach, Markus
Reese, Stefanie
et al.
Investigation of a bulge test at high temperatures and high strain rates using a finite-element simulation study
Contribution to a book, Contribution to a conference proceedings, Journal Article (2014)
Braun, Alexander
Bambach, Markus
Hirt, Gerhard
A finite element framework for the evolution of bond strength in joining-by-forming processes
Journal Article (2014)
Bambach, M.
Pietryga, M.
Mikloweit, A.
Hirt, G.
Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts
Journal Article (2014)
Daamen, Markus
Güvenc, Onur
Bambach, Markus
Hirt, Gerhard
Auswirkungen und Einschränkungen der Technologieintegration in Werkzeugmaschinen
Contribution to a book, Contribution to a conference proceedings (2014)
Brecher, Christian
Hirt, Gerhard
Bäumler, Stephan
Lohse, Wolfram
Bambach, Markus
et al.
Coupling of Crystal Plasticity Finite Element and Phase Fields Methods for the Prediction of SRX Kinetics after Hot Working
Contribution to a book, Journal Article (2014)
Güvenc, Onur
Bambach, Markus
Hirt, Gerhard
Crash behavior of high-manganes TWIP steel produced by strip casting and by an adapted hot forming route
Contribution to a conference proceedings (2014)
Daamen, Markus
Güvenc, Onur
Bambach, Markus
Hirt, Gerhard
Development of a testing procedure to determine the bond strength in joining-by-forming processes
Contribution to a book, Contribution to a conference proceedings (2014)
Mikloweit, Alexander
Bambach, Markus
Pietryga, Michael P.
Hirt, Gerhard
Roll bonding of two materials using temperature to compensate the material strength difference
Contribution to a book, Contribution to a conference proceedings (2014)
Melzner, Alina
Hirt, Gerhard
Very high cycle fatigue behaviour of riblet structured AlClad 2024 thin sheets
Journal Article (2014)
Stille, Sebastian
Pöplau, Julia
Beck, Tilmann
Bambach, Markus
Hirt, Gerhard
et al.
Influence of the process temperature on the properties of friction stir welded blanks made of mild steel and aluminium
Contribution to a conference proceedings, Journal Article (2014)
Mertin, Chris
Naumov, Andreas
Mosecker, Linda
Bambach, Markus
Hirt, Gerhard
Design and application of an advanced fast rolling model with through thickness resolution for heavy plate rolling
Contribution to a conference proceedings (2014)
Lohmar, Johannes
Seuren, Simon
Bambach, Markus
Hirt, Gerhard
Application of finite element analysis considering the complex tool kinematics of axial-profiling and dishing in ring rolling
Contribution to a conference proceedings (2014)
Schwich, Gideon
Seitz, Joachim
Jenkouk, Vahid
Hirt, Gerhard
Analysis of pore closure in open die forging by experimental and numerical simulation
Contribution to a conference proceedings (2014)
Rosenstock, Dirk
Melzner, Alina
Hirt, Gerhard
Tailored strips welding, strip profile rolling and twin roll casting
Contribution to a book, Contribution to a conference proceedings (2014)
Daamen, Markus
Davalos Julca, Daniel
Hirt, Gerhard
Profile Strip Casting with Inline Hot Rolling : Numerical Simulations for the Process Chain Design
Contribution to a conference proceedings, Journal Article (2014)
Vidoni, Michele
Mendel, Arne
Hirt, Gerhard
Intended Dishing in Ring Rolling
Contribution to a conference proceedings, Journal Article (2014)
Seitz, Joachim
Schwich, Gideon
Hirt, Gerhard
Manufacturing and tribological investigation of hot micro-coined lubrication pockets
Contribution to a conference proceedings, Journal Article (2014)
Szurdak, Adam
Rosenkranz, Andreas
Gachot, Carsten
Hirt, Gerhard
Mücklich, Frank
The influence of process parameters on the forming of riblets during riblet rolling
Contribution to a conference proceedings, Journal Article (2014)
Pöplau, Julia
Stille, Sebastian
Romans, Thijs
Beck, Tilmann
Singheiser, Lorenz
et al.
Optimization of a closed die forging process to manufacture a gear wheel by the use of a response surface model
Contribution to a book, Contribution to a conference proceedings (2014)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Finite Element implementation of a bonding model and application to roll bonding of aluminium sheets of largely different yield strength
Journal Article (2014)
Bambach, Markus
Pietryga, Michael P.
Mikloweit, Alexander
Hirt, Gerhard
Karhausen, Kai-Friedrich
Aktuelle Entwicklungen zur Auslegung und Optimierung von Ringwalzprozessen
Contribution to a conference proceedings (2014)
Hirt, Gerhard
Seitz, Joachim
Schwich, Gideon
Accounting for shear deformation in fast models for plate rolling
Journal Article (2014)
Seuren, Simon
Seitz, Joachim
Krämer, Alexander
Bambach, Markus
Hirt, Gerhard
Effiziente Strategien zur Prozessauslegung und -optimierung beim Ringwalzen
Journal Article (2014)
Schwich, Gideon
Seitz, Joachim
Hirt, Gerhard
Jenkouk, Vahid
Inverse Modeling Techniques for the Precise Prediction of Rolling Forces and Torques in Heavy Plate Rolling
Contribution to a book, Contribution to a conference proceedings (2013)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard Kurt Peter
Kiefer, Thomas
Kotliba, Daniel
Design and manufacturing of self-supporting folded structures using incrementalsheet forming
Contribution to a book, Contribution to a conference proceedings (2013)
Trautz, Martin
Heyden, Johann-Wilhelm
Herkrath, Ralf
Pofahl, Thorsten
Bailly, David
et al.
Survey on the Forming Limits in the Process Combination of Stretch-Forming and Incremental Sheet Metal Forming
Contribution to a conference proceedings (2013)
Göttmann, A.
Böhnke, S.
Voswinckel, H.
Bambach, Markus
Hirt, Gerhard
A novel approach for temperature control in ISF supported by laser and resistance heating
Journal Article (2012)
Göttmann, A.
Bailly, D.
Bergweiler, G.
Bambach, M.
Stollenwerk, J.
et al.
Einfluss experimenteller Unsicherheiten auf die Beschreibung des thermo-mechanischen Werkstoffverhaltens und der Randbedingungen für die Auslegung von Gesenkschmiedeprozessen
Contribution to a book, Contribution to a conference proceedings (2013)
Henke, Thomas
Hirt, Gerhard Kurt Peter
Bambach, Markus
Methoden für eine robuste, werkstoffgerechte Auslegung von Gesenkschmiedeprozessen
Contribution to a book (2013)
Henke, T.
Bambach, M.
Hirt, G.
Analyse von Sensitivitäten bei der Modellierung des Grobblechwalzens
Contribution to a book, Contribution to a conference proceedings (2013)
Seuren, S.
Bambach, M.
Hirt, G.
Willkomm, C.
Bischof, C.
et al.
Roll Bonding of Two Materials Using Temperature to Compensate the Material Strength Difference
Contribution to a book (2012)
Melzner, Alina
Hirt, Gerhard
Strip casting and ingot casting: comparison of different cooling conditions regarding the as-cast quality
Contribution to a book (2012)
Daamen, Markus
von Schweinichen, Petrico
Richter, Silvia
Hirt, Gerhard
Senk, Dieter
Design and manufacturing of self-supporting folded structures using incremental sheet forming
Contribution to a book, Contribution to a conference proceedings (2013)
Trautz, Martin
Heyden, Johann-Wilhelm
Herkrath, Rolf
Pofahl, Thorsten
Bailly, David
et al.
Pass schedule optimization and online visualization in open-die forging
Journal Article (2013)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
Influence of material processing steps annealing and cutting on magnetic materials properties relevant for electrical machine design
Contribution to a conference proceedings (2013)
Steentjes, Simon
Hameyer, Kay
Vogt, S.
Bednarz, M.
Volk, W.
et al.
Incremental Forging of Hollow Shafts
Contribution to a conference proceedings (2013)
Rosenstock, Dirk
Recker, Dominik
Hirt, Gerhard
Microstructure Analysis of High-manganese TWIP Steels Produced via Strip Casting
Contribution to a conference proceedings, Journal Article (2013)
Daamen, Markus
Richter, Silvia
Hirt, Gerhard
Randwerteermittlung für die robuste Auslegung von Schmiedeprozessen
Journal Article (2013)
Henke, Thomas
Hirt, Gerhard
Bambach, Markus
Manufacturing dish shaped rings on radial-axial ring rolling mills
Journal Article (2013)
Seitz, Joachim
Jenkouk, Vahid
Hirt, Gerhard
Stichplanoptimierung und Onlinevisualisierung beim Freiformschmieden
Journal Article (2013)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
Quantification of uncertainties in grain size predictions of a microstructure-based flow stress model and application to gear wheel forging
Journal Article (2013)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Advanced Design of Hierarchical Topographies in Metallic Surfaces by Combining Micro-Coining and Laser Interference Patterning
Journal Article (2013)
Gachot, Carsten
Rosenkranz, Andreas
Wietbrock, Burkhard
Hirt, Gerhard
Mücklich, Frank
Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process
Contribution to a book, Journal Article (2013)
Henke, Thomas
Hirt, Gerhard
Bambach, Markus
Riblet-rolling of clad AlCu4Mg1 sheets : passive drag reduction in aeronautics
Contribution to a conference proceedings (2013)
Pöplau, Julia
Romans, Thijs
Bambach, Markus
Hirt, Gerhard
Inverse modeling techniques for the precisxe prediction of rolling forces and torques in heavy plate rolling
Contribution to a conference proceedings (2013)
Lohmar, Johannes
Bambach, Markus
Hirt, Gerhard
Kiefer, Thomas
Kotliba, Daniel
Cold rolling of high manganese twip steel produced by strip casting and by an adpted hot forming route
Contribution to a conference proceedings (2013)
Daamen, Markus
Güvenc, Onur
Bambach, Markus
Hirt, Gerhard
Recent developments in modeling of hot rolling processes: Part I - Fundamentals
Contribution to a book, Contribution to a conference proceedings (2013)
Hirt, Gerhard
Bambach, Markus
Seuren, Simon
Henke, Thomas
Lohmar, Johannes
Recent developments in modeling of hot rolling processes: Part II - Applications
Contribution to a book, Contribution to a conference proceedings (2013)
Hirt, Gerhard
Bambach, Markus
Seuren, Simon
Henke, Thomas
Lohmar, Johannes
Numerical Simulations Supporting the Process Design of Ring Rolling Processes
Contribution to a book, Contribution to a conference proceedings (2013)
Jenkouk, Vahid
Hirt, Gerhard
Seitz, Joachim
Lightweight construction by open die forging of hollow generator shafts for wind power plants
Contribution to a conference proceedings (2013)
Recker, Dominik
Rosenstock, Dirk
Franzke, Martin
Hirt, Gerhard
Die and process design for hot forging of a gear wheel - a case study
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Application of a Fast Calculation Model for the Process Monitoring of Open Die Forging Processes
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Rosenstock, Dirk
Recker, Dominik
Hirt, Gerhard
Steingießer, Klaus-J.
Rech, Ralf
et al.
Advances in the Twin-roll Strip Casting of Strip with Profiled Cross Section
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Vidoni, Michele
Daamen, Markus
Hirt, Gerhard
Berücksichtigung von Unsicherheiten beim Einsatz mikrostrukturbasierter Werkstoffmodelle
Contribution to a conference proceedings (2013)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Mosecker, Linda
Göttmann, Alexander
Saeed-Akbari, Alireza
Bleck, Wolfgang
Bambach, Markus
et al.
Process Limits Of Stretch And Shring Flanging by Incremental Sheet Metal Forming
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Voswinckel, Holger
Bambach, Markus
Hirt, Gerhard
Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)]
Proceedings (2013)
Hirt, Gerhard
Bandgießen und Weiterverarbeitung profilierter Bänder und hochmanganhaltiger Stähle
Contribution to a conference proceedings (2013)
Daamen, Markus
Vidoni, Michele
Hirt, Gerhard
Forschung und Lehre im Wandel
Contribution to a conference proceedings (2013)
Hirt, Gerhard
Selbsttragende Leichtbaufassaden aus Edelstahl durch inkrementelle Blechumformung
Contribution to a conference proceedings (2013)
Bailly, David
Hirt, Gerhard
Herkrath, Ralf
Trautz, Martin
Analyse von Sensivitäten bei der Modellierung des Grobblechwalzens
Contribution to a conference proceedings (2013)
Seuren, Simon
Bambach, Markus
Hirt, Gerhard
Willkomm, Johannes
Bischof, Christian
et al.
Ringwalzen nicht-rechteckiger Querschnitte
Contribution to a conference proceedings (2013)
Jenkouk, Vahid
Seitz, Joachim
Hirt, Gerhard
Stichplanoptimierung und Online-Visualisierung beim Freiformschmieden
Contribution to a conference proceedings (2013)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Sommler, Dieter
et al.
Fast process models for the online optimisation of open die forging processes
Contribution to a conference proceedings (2013)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculate
Journal Article (2013)
Güvenc, Onur
Henke, Thomas
Laschet, Gottfried
Böttger, Bernd
Apel, Markus
et al.
Optimization of superplastic forming processes for high volume production in aeronautics
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Nick, Andreas
Zettler, Joachim
Hirt, Gerhard
Experimental investigations of different tool concepts for Rotary Peen Forming
Contribution to a book, Contribution to a conference proceedings, Journal Article (2013)
Russig, Christoph
Bambach, Markus
Hirt, Gerhard
Endabmessungsnahe Herstellung hochmanganhaltiger Stähle
Journal Article (2013)
Daamen, Markus
Hirt, Gerhard
Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming
Contribution to a book, Contribution to a conference proceedings (2012)
Göttmann, Alexander
Korinth, Marcus Christopher
Schäfer, V.
Taleb-Araghi, Babak
Bambach, Markus
et al.
Interaction effects between strip and work roll during flat rolling process
Contribution to a book (2013)
Puchhala, S.
Franzke, Martin
Hirt, Gerhard
Shortening Process Chains for Manufacturing Components with Functional Surfaces via Micro- and Nanostructures
Contribution to a book (2012)
Hirt, G.
Einfluss von Unsicherheiten auf die Parameteridentifikation und Vorhersagegenauigkeit mikrostrukturbasierter Werkstoffmodelle
Abstract, Contribution to a conference proceedings (2012)
Bambach, Markus
Henke, T.
Hirt, Gerhard
Bootstrap Analysis of Experimental Uncertainties Affecting the Accuracy of a Flow Stress Model for Metal Forming
Abstract (2012)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Recken
Contribution to a book (2012)
Ambaum, Egon
Hirt, Gerhard
Recker, Dominik
Stenzhorn, Franz
Stauchen
Contribution to a book (2012)
Ambaum, Egon
Hirt, Gerhard
Recker, Dominik
Steinzhorn, Frank
Freiformschmieden - Einführung
Contribution to a book (2012)
Heil, Hans-Peter
Hirt, Gerhard
Recker, Dominik
Stenzhorn, Frank
Walzen von Blechen und Profilen mit belastungsangepasster Dickenverteilung
Contribution to a book (2012)
Hirt, Gerhard
Hybrid Production Systems
Contribution to a book (2012)
Hirt, Gerhard
Bleck, Wolfgang
Bobzin, Kirsten
Brecher, Christian
Bührig-Polaczek, Andreas
et al.
Current Aspects of Modelling in Hot Rolling
Contribution to a conference proceedings (2012)
Hirt, Gerhard
Bambach, Markus
Seuren, Simon
Henke, Thomas
Wechselwirkung zwischen Maschine und Walzgut
Contribution to a book (2012)
Hirt, Gerhard
Oligschläger, Marius
Längswalzen von Flachprodukten
Contribution to a book (2012)
Hirt, Gerhard
Oligschläger, Marius
Seuren, Simon
Übersicht über die Walzverfahren
Contribution to a book (2012)
Hirt, Gerhard
Oligschläger, Marius
Herstellung frei geformter, selbst tragender Faltstrukturen aus Stahlblech mit der inkrementellen Blechufmormung (IBU)
Journal Article (2012)
Trautz, Martin
Heyden, Willi
Herkrath, Ralf
Pofahl, Thorsten
Hirt, Gerhard
et al.
Improving the Efficiency of Incremental Sheet Metal Forming
Contribution to a book (2012)
Bleck, Wolfgang
Hirt, Gerhard
Loosen, Peter
Poprawe, Reinhart
Reisgen, Uwe
et al.
Incremental Sheet Forming
Contribution to a book (2012)
Hirt, Gerhard
Bambach, Markus
Current objectives and approaches in simulation and modelling of rolling processes
Contribution to a book, Contribution to a conference proceedings, Journal Article (2012)
Hirt, Gerhard
Jenkouk, Vahid
Romans, Thijs
Seuren, Simon
Implementation of Closed-loop Control Systems in Finite Element Simulations fo Roller Leveling
Contribution to a book, Contribution to a conference proceedings, Journal Article (2012)
Oligschläger, Marius
Hirt, Gerhard
Process Planning, Online Optimization and Through Process Microstructure Modelling in Forming and Ring Rolling
Contribution to a conference proceedings (2012)
Hirt, Gerhard
Recker, Dominik
Henke, Thomas
Jenkouk, Vahid
Design and Manufacting of Self-Supporting Architectural Free-Form Structures using Incremental Sheet Forming
Contribution to a conference proceedings (2012)
Bailly, David
Taleb-Araghi, Babak
Hirt, Gerhard
Trautz, Martin
Herkrath, Ralf
Sensitivity Analysis of a Force and Microstructure Model for Plate Rolling
Abstract, Contribution to a conference proceedings (2012)
Seuren, Simon
Willkomm, Johannes
Bücker, Hans
Bambach, Markus
Hirt, Gerhard
Effects of the Variation of Profile Shape on the Geometric Accuracy and Microstructure in Profile Strip Casting
Abstract, Contribution to a book, Contribution to a conference proceedings, Journal Article (2012)
Daamen, Markus
Vidoni, Michele
Henke, Lars
Hirt, Gerhard
Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations
Journal Article (2012)
Reeh, Stephanie
Music, Denis
Gebhardt, Thomas
Kasprzak, M.
Jäpel, T.
et al.
Vom Werkstoff zum Produkt - Ausblick auf das nächste ASK-Umformtechnik
Contribution to a conference proceedings (2012)
Hirt, Gerhard
Bambach, Markus
Void closure in heavy ingots - a comparision of rolling and open die forging
Contribution to a conference proceedings (2012)
Seuren, Simon
Romans, Thijs
Recker, Dominik
Rosenstock, Dirk
Bambach, Markus
et al.
Optimisation of a basic pass schedule for open die forming with regards to a homogeneous strain distribution along the core
Contribution to a conference proceedings (2012)
Rosenstock, Dirk
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Fast, model based grain size calculation of open die forgings on basis of pass schedules
Contribution to a conference proceedings (2012)
Rosenstock, Dirk
Recker, Dominik
Henke, Thomas
Franzke, Martin
Hirt, Gerhard
3D-FE simulation of ring rolling with integrated closed-loop tool motion control
Contribution to a conference proceedings (2012)
Jenkouk, Vahid
Hirt, Gerhard
Franzke, Martin
Finite element analysis of the ring rolling process with integrated closed-loop control
Journal Article (2012)
Jenkouk, Vahid
Hirt, Gerhard
Franzke, Martin
Zhang, T.
Manufacturing of cranial implants using incremental sheet metal forming
Contribution to a conference proceedings (2012)
Göttmann, Alexander
Korinth, M.
Taleb-Araghi, Babak
Bambach, Markus
Hirt, Gerhard
Konzepte zur integrierten Modellierung von Gefüge- und Fließspannungsentwicklung in der Simulation von Warmumformprozessen
Contribution to a conference proceedings (2012)
Bambach, Markus
Seuren, Simon
Henke, Thomas
Heppner, Stephan
Xiong, Wei
et al.
Tailored Profiles Made of Tailor Rolled Strips by Roll Forming - Part 1 of 2
Journal Article (2012)
Hirt, Gerhard
Dávalos-Julca, Daniel H.
A new tool concept for rotary peen forming with defined impact positions
Journal Article (2012)
Russig, Christoph
Bambach, Markus
Hirt, Gerhard
Hot forming and characterization of forming behavior of three ternary Fe-Mn-C high-manganese steels
Abstract, Contribution to a conference proceedings (2011)
Hirt, Gerhard
Integrative Simulation des U/O-Umformens und des UP-Schweißens für die Berechnung von Verzug und Eigenspannung
Contribution to a conference proceedings (2011)
Reisgen, Uwe
Rossiter, E.
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Steigerung der Leistungsfähigkeit der inkrementellen Blechumformung
Contribution to a book (2011)
Bleck, Wolfgang
Hirt, Gerhard
Loosen, Peter
Poprawe, Reinhart
Reisgen, Uwe
et al.
Hohlwellen für Windkraftanlagen Prozessauslegung anhand von FEM-Simulationen
Journal Article (2011)
Hirt, Gerhard
Schafer, David
Franzke, Martin
Crystalline γ-Al2O3 Physical Vapour Deposition-Coating for Steel Thixoforging Tools
Journal Article (2011)
Bobzin, Kirsten
Hirt, Gerhard
Bagcivan, Nazlim
Khizhnyakova, Liudmila
Ewering, Mara Therese
Hybride Produktionssysteme
Contribution to a book (2011)
Hirt, Gerhard
Bleck, Wolfgang
Bobzin, Kirsten
Brecher, Christian
Bührig-Polaczek, Andreas
et al.
FEM-Simulation des Werkzeugversagens beim Warmmassivumformprozessen infolge thermisch-mechanischer Materialermüdung
Journal Article (2011)
Behrens, Bernd-Arno
Bouguecha, Anas
Hadifi, Tarik
Hirt, Gerhard
Franzke, Martin
et al.
Numerical and experimental analysis of electric conductive heating for micro warm coining of stainless steel
Journal Article (2011)
Zhao, Kunning
Wietbrock, Burkhard
Hirt, Gerhard
Umformen und Hinterspritzen mit Ansage
Journal Article (2011)
Michaeli, Walter
Hopmann, Christian
Mäsing, Roland
Hirt, Gerhard
Reinartz, Heinz
Predictive Forming and Backmolding
Journal Article (2011)
Michaeli, Walter
Hopmann, Christian
Mäsing, Roland
Hirt, Gerhard
Reinartz, Heinz
SIBUform - Steigerung der Produktivität und des Anwendungsspektrums bei inkrementeller Blechumformung durch Kombination mit Streckziehen
Book (2011)
Hirt, Gerhard
Bambach, Markus
Taleb-Araghi, Babak
Malik, Adam
Vitr, Mirco
et al.
Parametric modelling of complex open die forming processes
Contribution to a conference proceedings (2011)
Schäfer, David
Medeiros, Gian Paulo
Colombo, Tiago
Hirt, Gerhard
Schaeffer, Lirio
The Development of a New Peen Forming Process - Rotary Peen Forming
Contribution to a conference proceedings (2011)
Bambach, Markus
Russig, Christoph
Hirt, Gerhard
Alwood, Julian
Numerical and Experimental Analysis of Closed Die Micro Warm Coining of Stanless Steel
Contribution to a conference proceedings (2011)
Zhao, Kunning
Wietbrock, Burkhard
Hirt, Gerhard
Size Effects of (Flexible) Rolling of Wire and Micro Strip
Contribution to a conference proceedings (2011)
Romans, Thijs
Flesch, Gregor
Wietbrock, Burkhard
Hirt, Gerhard
Experimental and Numerical Investigation of Double Roller Casting of Strip with Profiled Cross Section
Contribution to a conference proceedings (2011)
Daamen, Markus
Förster, Timo
Hirt, Gerhard
Investigations into the Process Mechanics of the Hybrid Process Combination of Stretch Forming and Incremental Sheet Forming
Contribution to a conference proceedings (2011)
Taleb-Araghi, Babak
Bambach, Markus
Hirt, Gerhard
Zettler, Joachim
Investigations of the Plain Strain Compression of am Oligocrystalline Specimen
Contribution to a conference proceedings (2011)
van Putten, Koos
Roters, Frank
Hirt, Gerhard
Lightweight Design by Flexible Rolling and Strip Profile Rolling
Contribution to a conference proceedings (2011)
Davalos Julca, Daniel
Förster, Timo
Wietbrock, Burkhard
Hirt, Gerhard
Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production
Journal Article (2011)
Taleb-Araghi, Babak
Göttmann, Alexander
Bambach, Markus
Hirt, Gerhard
Bergweiler, Georg
et al.
Experimental Uncertainties affecting the Accuracy of Stress-Strain Equations by the Example of a Hensel-Spittel Approach
Contribution to a conference proceedings (2011)
Henke, Thomas
Bambach, Markus
Hirt, Gerhard
Fast models for online-optimization during open die forging
Journal Article (2011)
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Modeling the Flow Behavior of a High-Manganese Steel Fe-Mn23-C0.6 in Consideration of Dynamic Recrystallization
Contribution to a book, Journal Article (2011)
Xiong, Wei
Wietbrock, Burkhard
Saeed-Akbari, Alireza
Bambach, Markus
Hirt, Gerhard
Enhanced Homogenization Strategy by Electroslag Remelting of High-Manganese TRIP and TWIP Steels
Journal Article (2011)
Reitz, Jan Bertil
Wietbrock, Burkhard
Richter, Silvia
Hoffmann, Sascha
Hirt, Gerhard
et al.
Investigation on Incremental Sheet Forming combined with Laser Heating and Stretch Forming for the production of lightweight structures
Contribution to a book, Contribution to a conference proceedings, Journal Article (2011)
Taleb-Araghi, Babak
Göttmann, Alexander
Bergweiler, Georg
Saeed-Akbari, Alireza
Bültmann, Jan
et al.
Experimental and numerical investigations of the plane strain compression of an oligocrystalline pure copper specimen
Journal Article (2011)
van Putten, Koos
Roters, Frank
Kirch, Dirk M.
Hirt, Gerhard
Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts
Journal Article (2011)
Göttmann, Alexander
Diettrich, Joerg
Bergweiler, Georg
Bambach, Markus
Hirt, Gerhard
et al.
Micro Warm Coining of Stainless Steel Sheets Using Electric Conductive Heating
Contribution to a book, Contribution to a conference proceedings, Journal Article (2011)
Zhao, Kunning
Wietbrock, Burkhard
Hirt, Gerhard
Design for manufacture based on an integrated product process design model
Contribution to a book, Contribution to a conference proceedings, Journal Article (2011)
Voswinckel, Holger
Schleifenbaum, Henrich
Bambach, Markus
Hirt, Gerhard
Effect of Temperature, Strain rate, Manganese and Carbon Content on flow Behavior of three Ternary Fe-Mn-C (Fe-Mn23-C0.3, Fe-Mn23-C0.6, Fe-Mn28-C0.3) High-Manganese Steels
Contribution to a conference proceedings, Journal Article (2011)
Wietbrock, Burkhard
Xiong, Wei
Bambach, Markus
Hirt, Gerhard
Strip Casting of a High-Manganese Steel (FeMn22C0.6) Compared with a Process Chain Consisting of Ingot Casting and Hot Forming
Contribution to a conference proceedings, Journal Article (2011)
Daamen, Markus
Wietbrock, Burkhard
Richter, Silvia
Hirt, Gerhard
New Cold Rolling Technologies for Lightweight Design and Functional Riblet Surfaces
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Geometric Factors for Fast Calculation of Roll Force in Plate Rolling
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Physical and Numerical Simulation of Cold Rolling of an AlFeSi Alloy in Consideration of Static Recovery
Journal Article (2010)
Heering, Christoph
Li, Xiaoli
Bambach, Markus
Hirt, Gerhard
Grain size prediction during open die forging processes
Journal Article (2010)
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
Steingiesser, K.
Numerical prediction of microstructure in high-strength ductile forging parts
Journal Article (2010)
Back, Arthur
Urban, Marcus
Keul, Christoph Alexander
Bleck, Wolfgang
Hirt, Gerhard
Bulk Metal Formed Parts for Power Plants
Contribution to a conference proceedings (2010)
Schäfer, David
Franzke, Martin
Hirt, Gerhard
Recent Developments in Metal Forming
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Heppner, Stephan
New Methods for Computer-Assisted Optimization of Forging Die Life
Contribution to a conference proceedings (2010)
Lopez Santaella, Mauricio
Franzke, Martin
Hirt, Gerhard
Phenomenological microstructure simulation of incremental bulk metal forming using a multi mesh method
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Schäfer, David
Prediction of Microstructure in High‐Strength Ductile Forging Parts
Contribution to a conference proceedings (2010)
Urban, Marcus
Keul, Christoph Alexander
Back, Arthur
Bleck, Wolfgang
Hirt, Gerhard
Integrative Bearbeitung von Fleinblechen: Werkzeugfertigung, Streckziehen und Endbearbeitung auf einer Maschine
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Taleb-Araghi, Babak
Voswinckel, Holger
Entwicklung eines hochfesten duktilen bainitischen (HDB) Stahls für hochbeanspruchte Schmiedebauteile
Journal Article (2010)
Keul, Christoph Alexander
Urban, Marcus
Back, Arthur
Hirt, Gerhard
Bleck, Wolfgang
Schnelle Modelle zur Simulation der Gefügeevolution beim Ringwalzen
Journal Article (2010)
von Hehl, Axel
Hirt, Gerhard
Selected trends for metal forming innovations
Contribution to a book, Journal Article (2010)
Hirt, Gerhard
Heppner, Stephan
Investigations on Semi-solid Joined Steel Components and their Bonding Quality
Journal Article (2010)
Hirt, Gerhard
Baadjou, René
Knauf, Frederik
Metal flow and die wear in semi-solid forging of steel using coated dies
Journal Article (2010)
Khizhnyakova, L.
Ewering, Mara Therese
Hirt, G.
Bobzin, Kirsten
Bagcivan, Nazlim
Semi-solid forming of non axis-symmetric parts from steel grade X210CrW12 with PVD coated tools
Contribution to a conference proceedings, Journal Article (2010)
Hirt, Gerhard
Bobzin, Kirsten
Khizhnyakova, Liudmila
Ewering, Mara Therese
Bagcivan, Nazlim
Development of hybrid incremental sheet forming processes
Contribution to a book, Contribution to a conference proceedings, Journal Article (2010)
Taleb-Araghi, Babak
Göttmann, Alexander
Bambach, Markus
Biermann, Tim
Hirt, Gerhard
et al.
New high strength ductile bainitic forging steels
Contribution to a conference proceedings (2010)
Keul, Christoph Alexander
Urban, Marcus
Fischer, Martin
Hirt, Gerhard
Bleck, Wolfgang
Hochdruckblechumformung durch Kunststoffhinterspritzen
Contribution to a conference proceedings (2010)
Reinartz, Heinz
Mäsing, Roland
Hirt, Gerhard
Rolling of Drag Reducing Riblet Surface
Contribution to a conference proceedings, Report (2010)
Romans, Thijs
Hirt, Gerhard
Globale Herausforderungen: Impulse für die Umformtechnik
Contribution to a conference proceedings (2010)
Hirt, Gerhard
Heppner, Stephan
Schnelle Modelle zur Online-Optimierung beim Freiformschmieden
Contribution to a conference proceedings (2010)
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
Flexibles Profilieren nahtloser Ringe aus Stahl
Contribution to a conference proceedings (2010)
Goldbach, Viola
Hirt, Gerhard
Michl, Dennis
Tiedemann, Ingo
Geometriefaktoren für die schnelle Berechnung von Walzkräften
Contribution to a conference proceedings (2010)
Seuren, Simon
Hirt, Gerhard
Bambach, Markus
Walzen feiner Riblet-Oberflächen zur Reduktion von Strömungswiderständen
Contribution to a conference proceedings (2010)
Romans, Thijs
Thome, Mario
Klumpp, Stephan Werner
Hirt, Gerhard
Hybride inkrementelle Blechumformung (IBU) für Leichtbaustrukturen
Contribution to a conference proceedings (2010)
Taleb-Araghi, Babak
Göttmann, Alexander
Bambach, Markus
Hirt, Gerhard
Adaptive meshing for the thermo-mechanical simulation of incremental bulk metal forming processes
Abstract, Contribution to a conference proceedings (2010)
Schäfer, David
Hirt, Gerhard
Homogenization strategy and material characterization of high-manganese TRIP and TWIP steels
Journal Article (2010)
Wietbrock, Burkhard
Bambach, Markus
Seuren, Simon
Hirt, Gerhard
Ansätze zur Qualitätsoptimierung beim Freiformschmieden
Journal Article (2010)
Recker, Dominik
Hirt, Gerhard
Franzke, Martin
Verbesserte numerische Prozesssimulation mittels eines innovativen Reibgesetzes für die Warmmassivumformung
Journal Article (2010)
Behrens, Bernd-Arno
Bouguecha, Anas
Mielke, Jens
Hirt, Gerhard
Bambach, Markus
et al.
Experimental and numerical investigation of grid sheet bending behaviour in four-roll bending
Contribution to a conference proceedings, Journal Article (2010)
Gu, Xiaobo
Franzke, Martin
Bambach, Markus
Hirt, Gerhard
Derivation of Recovery Kinetics From Stress Relaxation Tests
Contribution to a conference proceedings, Journal Article (2010)
Hirt, Gerhard
Heering, Christoph
Gottstein, Günter
Mohles, Volker
Bhaumik, Sheila
Size effects on miniaturised rolling processes
Journal Article (2010)
van Putten, Koos
Hirt, Gerhard
Numerical analysis of stake mark induced failure of a rotor shaft
Journal Article (2010)
Bambach, Markus
Hirt, Gerhard
Al-Baouni, Mohammed
Kilpatrick, N.
Soto, St.
et al.
Hot Forging of C45 using PVD (Ti,Al)N/γ-Al2O3 Coated Dies
Journal Article (2010)
Bobzin, Kirsten
Hirt, Gerhard
Springorum, F.
Zitz, U.
Steinhof, N.
et al.
Bedeutung von Größeneffekten für die Mikro-Blechumformung
Contribution to a conference proceedings (2009)
Hirt, Gerhard
Thixoforming : semi-solid metal processing
Book (2009)
Hirt, Gerhard
Kopp, Reiner
Experimental procedures for characterization of static recovery in cold rolling processes of AlFeSi alloys
Contribution to a conference proceedings (2009)
Heering, Christoph
Li, Xiaoli
Bambach, Markus
Hirt, Gerhard
Neuere Entwicklungen bei der inkrementellen Umformung von Blechen
Contribution to a conference proceedings (2009)
Hirt, Gerhard
Bambach, Markus
Taleb-Araghi, Babak
Göttmann, Alexander
Micro Coining to Create Functional Surfaces
Contribution to a conference proceedings (2009)
Wietbrock, Burkhard
Zhao, Kunning
Hirt, Gerhard
Determination of a Geometric Factor for the Calculation of Roll Force in Plate Rolling by means of Finite Element Simulations
Contribution to a conference proceedings (2009)
Seuren, Simon
Philipp, M.
Bambach, Markus
Hirt, Gerhard
Rolling of Aluminium Riblet-Surface
Contribution to a conference proceedings (2009)
Romans, Thijs
Wietbrock, Burkhard
Thome, Mario
Hirt, Gerhard
Semi-Solid Forging and Joining of Steel Components and their Properties
Contribution to a conference proceedings (2009)
Baadjou, René
Knauf, Frederik
Hirt, Gerhard
Experimental investigations of grid sheet bending behaviour
Contribution to a conference proceedings (2009)
Gu, Xiaobo
Hirt, Gerhard
Strip Profile Rolling: A method to produce tailor strips for lightweight profiles
Contribution to a conference proceedings (2009)
Davalos Julca, Daniel
Hirt, Gerhard
Groche, Peter
Mirtsch, Michael
Roll wear analysis and rolling force reduction through lubrication during the hot rolling operation of a twin roll casting process
Contribution to a conference proceedings (2009)
Kane-Garcia, William
Gräf, Gerhard
Hirt, Gerhard
Ernenputsch, Lutz
Klos, Wilfried
et al.
Homogenization strategy and material characterization of highmanganese TRIP and TWIP steels
Contribution to a conference proceedings (2009)
Wietbrock, Burkhard
Bambach, Markus
Hirt, Gerhard
Optimization of tailored products
Contribution to a conference proceedings (2009)
Urban, Marcus
Franzke, Martin
Hirt, Gerhard
Globale Herausforderungen: Neue Märkte für die Umformtechnik
Contribution to a conference proceedings (2009)
Hirt, Gerhard
Grain size prediction during open die forging processes
Contribution to a conference proceedings (2009)
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Rech, Ralf
Steingießer, Klaus
Innenhochdruck-Umformung von endkonturnahen Tailored Tubes
Journal Article (2009)
Urban, Marcus
Henn, René
Hirt, Gerhard
Riblet Rolling
Journal Article (2009)
Romans, Thijs
Thome, Mario
Hirt, Gerhard
Flexible Verfahren für das Profilieren von nahtlosen Ringen
Journal Article (2009)
Goldbach, Viola
Hirt, Gerhard
Strategies to improve the geometric accuracy in asymmetric single point incremental forming
Journal Article (2009)
Bambach, Markus
Taleb-Araghi, Babak
Hirt, Gerhard
Comparison of some final part geometrical characteristics of cylindrical cups manufactured by deep-drawing and two-point incremental sheet forming
Contribution to a book, Contribution to a conference proceedings, Journal Article (2009)
Taleb-Araghi, Babak
Bambach, Markus
Hirt, Gerhard
Cold rolling processes to functionalize semi-finished products
Contribution to a conference proceedings (2009)
van Putten, Koos
Hirt, Gerhard
Thome, Mario
Kopp, Reiner
Comparison of springback behavior for cylindrical cups manufactured by deep drawing and asymmetric incremental sheet forming (ASIF)
Contribution to a conference proceedings (2009)
Taleb-Araghi, Babak
Bambach, Markus
Manco, Leonardo
Hirt, Gerhard
Semi-solid forging and joining of steel components and their properties
Contribution to a conference proceedings, Journal Article (2009)
Baadjou, René
Knauf, Frederik
Hirt, Gerhard
Analysis of Semi-Solid Extrusion Products made of Steel Alloy X210CrW12
Contribution to a conference proceedings, Journal Article (2009)
Knauf, Frederik
Baadjou, René
Hirt, Gerhard
Use of Modern High Strength Steels in Load Adapted Hydroformed B-Pillars
Journal Article (2009)
Urban, Marcus
Hirt, Gerhard
Estimation of grain size and grain orientation influence in micro forming processes by taylor factor considerations
Journal Article (2009)
Justinger, Holger
Hirt, Gerhard
Investigation into a new hybrid forming process: incremental sheet forming combined with stretch forming
Contribution to a conference proceedings, Journal Article (2009)
Taleb-Araghi, Babak
Manco, G. L.
Bambach, Markus
Hirt, Gerhard
Große Möglichkeiten, große Herausforderungen: Thixoforming von Stahl und Aluminium
Journal Article (2009)
Hirt, Gerhard
Baadjou, René
Bührig-Polaczek, Andreas
Bünck, Matthias
High Strength Ductil Bainitic Steel for High Stressed Forged Structurals Parts
Contribution to a conference proceedings (2009)
Urban, Marcus
Keul, Christoph Alexander
Bleck, Wolfgang
Hirt, Gerhard
Hybrid laser assisted incremental sheet forming - improving formability of Ti- and Mg-based alloys
Contribution to a conference proceedings (2009)
Biermann, Tim
Göttmann, Alexander
Zettler, Joachim
Bambach, Markus
Weisheit, Andreas
et al.
Towards Shot Peen Forming of Sandwich and Laminate Sheets: Basic Investigations and First Industrial Applications
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Semi-solid processing of alloys and composites X : selected, peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2008, September 16th - 18th, 2008, Aachen, Germany and Liège, Belgium
Proceedings (2008)
Hirt, Gerhard
Rassili, Ahmed
Bührig-Polaczek, Andreas
Development of a tailored, hydroformend B-pillar in consideration of the forming history
Contribution to a conference proceedings (2008)
Urban, Marcus
Hirt, Gerhard
Wallentowitz, Henning
Henn, René
Neue Modellierungsansätze für die konventionelle und hybride inkrementelle Blechumformung
Contribution to a conference proceedings (2008)
Taleb-Araghi, Babak
Bambach, Markus
Hirt, Gerhard
Production of blanks with thickness transitions in longitudinal and lateral direction through 3D-strip profile rolling
Contribution to a conference proceedings, Journal Article (2008)
Ryabkov, Nikolai
Jackel, Frank Martin
van Putten, Koos
Hirt, Gerhard
Semi-solid extrusion of complex-shaped steel rods using ceramic dies
Contribution to a book, Contribution to a conference proceedings, Journal Article (2008)
Münstermann, Simon
Telle, Rainer
Knauf, Frederik
Hirt, Gerhard
Validation of an improved dislocation density based flow stress model for Al-alloys
Contribution to a conference proceedings, Journal Article (2008)
Mohles, Volker
Li, Xiaohui
Heering, Christoph
Hirt, Gerhard
Bhaumik, Sheila
et al.
Walzen von mikrostrukturierten Funktionsoberflächen
Contribution to a book (2008)
Hirt, Gerhard
Thome, Mario
Numerical investigations of a load adapted, hydroformed B-pillar
Contribution to a conference proceedings (2008)
Urban, Marcus
Henn, René
Hirt, Gerhard
Error control in explicit finite element simulations of incremental sheet metal forming
Contribution to a conference proceedings (2008)
Bambach, Markus
Taleb-Araghi, Babak
Hirt, Gerhard
Reimers, W.
Elastic-plastic bending of welded grid sheet
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Kopp, Reiner
Franzke, Martin
van Santen, Johan
Improved remeshing algorithmus for a multi mesh method applied to ring rolling simultion
Contribution to a conference proceedings (2008)
Schäfer, David
Hirt, Gerhard
Franzke, Martin
Barton, Gabriel
Four-roll bending of welded grid sheet
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Franzke, Martin
Bambach, Markus
van Santen, Johan
Harms, Alexander
et al.
The potential of intentional rolling of spread bulges for ring shaped products
Contribution to a conference proceedings (2008)
Goldbach, Viola
Hirt, Gerhard
Investigation into the prediction of forming limits in incremental sheet metal forming using damage models
Contribution to a conference proceedings (2008)
Bambach, Markus
Hirt, Gerhard
Optimization of forging process of profiled discs for low presure trubine rotors by FEM simulation
Contribution to a conference proceedings (2008)
Weides, G.
Blaes, N.
Bokelmann, D.
Hümbert, M.
Poppenhäger, J.
et al.
Flexible axial profile ring rolling
Contribution to a conference proceedings (2008)
Michl, Dennis
Hirt, Gerhard
Jenkouk, Vahid
The open die forging industry associated with the german steel institute VDEh/Germany
Contribution to a conference proceedings (2008)
Franzke, Martin
Hirt, Gerhard
Sheikhi, S.
Wuppermann, Carl-Dieter
Rech, Ralf
Gekoppelte Analyse von Massivumformprozessen mit LARSTRAN/Shape
Contribution to a conference proceedings (2008)
Franzke, Martin
Puchhala, Sreedhar
Dackweiler, Harald
Hirt, Gerhard
Entwicklung eines Prozessmodells zur Online-Optimierung von Freiformschmiedungen großer Blöcke
Contribution to a conference proceedings (2008)
Franzke, Martin
Recker, Dominik
Hirt, Gerhard
Thixoforming von Stahl und Aluminium
Journal Article (2008)
Hirt, Gerhard
Baadjou, René
Recent developments in incremental sheet forming for prototype and small series
Contribution to a conference proceedings (2008)
Ziegler, Simon
Hirt, Gerhard
Bambach, Markus
Light weight structures by tailor rolled sheets and strips
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Kopp, Reiner
Application of the shot peen forming process to sandwich- and laminate structures
Contribution to a conference proceedings (2008)
Dackweiler, Harald
Hirt, Gerhard
Materials modelling in forming simulation
Contribution to a conference proceedings (2008)
Li, Xiaoli
Hirt, Gerhard
Online calculation of equivalent strain, temperature and microstructure within the workpiece during open die forging
Contribution to a conference proceedings (2008)
Recker, Dominik
Franzke, Martin
Hirt, Gerhard
Modelling of incremental sheet metal forming
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Bambach, Markus
Semi-solid forming and joining of steel
Contribution to a conference proceedings (2008)
Hirt, Gerhard
Baadjou, René
Knauf, Frederik
Investigations on thermal influences for thixoforging and thixojoining of steel components
Contribution to a book, Contribution to a conference proceedings, Journal Article (2008)
Baadjou, René
Knauf, Frederik
Hirt, Gerhard
Increasing of the drawing depth using tailor rolled blanks : numerical and experimental analysis
Contribution to a conference proceedings, Journal Article (2008)
Meyer, Alexander
Wietbrock, Burkhard
Hirt, Gerhard
Modelling and optimisation of incremental bulk metal-forming processes for near net shape components
Contribution to a conference proceedings, Journal Article (2008)
Hofmann, Oliver
Hirt, Gerhard
Franzke, Martin
Schäfter, David
Near net shaping ring geometries manufactured from spread bulges and flexible axial profiling methods
Contribution to a book, Contribution to a conference proceedings, Journal Article (2008)
Goldbach, Viola
Michl, Dennis
Hirt, Gerhard
Recent enhancements in flow stress determination using high-speed compression tests
Contribution to a book, Contribution to a conference proceedings, Journal Article (2008)
Heering, Christoph
Rehrmann, Torsten
Kopp, Reiner
Hirt, Gerhard
Development of a process model for online-optimization of open die forging of large workpieces
Journal Article (2008)
Franzke, Martin
Recker, Dominik
Hirt, Gerhard
Rolling of functional metallic surface structures
Contribution to a conference proceedings, Journal Article (2008)
Hirt, Gerhard
Thome, Mario
Process window determination for thixoextrusion processes using a steel alloy
Contribution to a book, Contribution to a conference proceedings, Journal Article (2008)
Knauf, Frederik
Baadjou, René
Hirt, Gerhard
Adaptive cross-approximation for surface reconstruction using radial basis functions
Journal Article (2008)
Hirt, Gerhard
Bambach, Markus
Grzhibovskis, Richard
Rjasanow, Sergej
Umformtechniker walzen metallische Haifischhaut : Untersuchung neuer Methoden zur Herstellung strömungsoptimierter Metalloberflächen
Contribution to a book, Journal Article (2008)
Feldhaus, Björn
Klocke, Fritz
Hirt, Gerhard
Thome, Mario
Modeling of the hot rolling process of a C45 steel (TP B1)
Contribution to a conference proceedings (2007)
Li, X.
Kopp, Reiner
Hirt, Gerhard
Zeislmair, Barbara
Bleck, Wolfgang
Optimisation of strip casting conditions and surface conditions for coating
Book, Report, Report (2007)
Nicolle, Rémy
Lamande, A.
Schmitz, W.
Leuschner, R.
Kopp, Reiner
et al.
Influences of size effects on the rolling of micro strip
Contribution to a conference proceedings (2007)
van Putten, Koos
Kopp, Reiner
Hirt, Gerhard
Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel
Contribution to a conference proceedings (2007)
Knauf, Frederik
Hirt, Gerhard
Immich, Philipp
Bobzin, Kirsten
Incremental bulk metal forming
Contribution to a conference proceedings, Journal Article (2007)
Groche, Peter
Fritsche, D.
Tekkaya, E. A.
Allwood, Julian M.
Hirt, Gerhard
et al.
Umformtechnik : Stahl und NE-Werkstoffe ; der Zukunft Form geben ; Tagungsband
Proceedings (2007)
Hirt, Gerhard
Thixoforming of steels – a status report
Journal Article (2007)
Püttgen, Wolfgang
Bleck, Wolfgang
Hirt, Gerhard
Shimahara, Hideki
Incremental Sheet Forming - Process Simulation with LS-Dyna
Contribution to a conference proceedings (2007)
Zettler, J.
Rezai, H.
Taleb-Araghi, Babak
Bambach, Markus
Hirt, Gerhard
Herausforderungen und Entwicklungstrends für die Umformtechnik
Contribution to a conference proceedings (2007)
Kopp, Reiner
Hirt, Gerhard
Hofmann, Oliver
Error Analysis In Explicit Finite Element Analysis Of Incremental Sheet Forming
Contribution to a conference proceedings (2007)
Bambach, Markus
Hirt, Gerhard
Large area rolling of functional metallic micro structures
Journal Article (2007)
Hirt, Gerhard
Thome, Mario
Material flow determination for radial flexible profile ring rolling
Journal Article (2007)
Tiedemann, Ingo
Hirt, Gerhard
Michl, Dennis
Khangari, Nastaran
Kopp, Reiner
Finite-Element Modeling of Multi-Pass Forging of Nickel-Base Alloys Using a Multi-Mesh Method
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Barton, Gabriel
Li, Xiaoli
Hirt, Gerhard
Thixoforming von Stahl : ein Überblick
Contribution to a conference proceedings (2007)
Bührig-Polaczek, Andreas
Hirt, Gerhard
Bleck, Wolfgang
Küthe, Fabian
Shimahara, H.
et al.
Development of two innovative rolling processes for the production of defined riblet structures in consideration of common fluid dynamic requirements
Contribution to a conference proceedings (2007)
Klocke, Fritz
Feldhaus, Björn
Hirt, Gerhard
Thome, Mario
Klumpp, Stephan Werner
et al.
New developments in incremental sheet forming
Contribution to a conference proceedings (2007)
Hirt, Gerhard
Ames, Jochen Peter
Bambach, Markus
Ziegler, Simon
Funktionale Oberflächen auf Al-und Cu-Werkstoffen durch Prägen und Walzen
Contribution to a conference proceedings (2007)
Thome, Mario
Hirt, Gerhard
Kopp, Reiner
Untersuchungen zur Vermeidung von Oberflächenfehlern beim Freiformschmieden von hochlegierten Stahlen
Contribution to a conference proceedings (2007)
Schneider, Verena
Hirt, Gerhard
Brethfeld, A.
Lehmann, G.
Modellierung inkrementeller Umformverfahren
Contribution to a conference proceedings (2007)
Bambach, Markus
Barton, Gabriel
Franzke, Martin
Hirt, Gerhard
Größeneffekte bei der Miniaturisierung des Drahtflachwalzens und Tiefziehen von Cu-Werkstoffen
Contribution to a conference proceedings (2007)
Justinger, Holger
van Putten, Koos
Hirt, Gerhard
Size effects in micro deep drawing and rolling of flat wire
Contribution to a conference proceedings (2007)
Putten, van Koos
Justinger, Holger
Hirt, Gerhard
Hofmann, Oliver
Modelling and optimization of incremental bulk metal forming processes for near net shape components
Contribution to a conference proceedings (2007)
Hofmann, Oliver
Hirt, Gerhard
Franzke, Martin
Schäfer, David
Computer-aided toll path optimization for single point incremental sheet forming
Contribution to a conference proceedings (2007)
Bambach, Markus
Cannamela, M.
Azaouzi, M.
Hirt, Gerhard
Batoz, J. L.
Size effect on friction and yielding in wire flat rolling
Contribution to a conference proceedings (2007)
Putten, van Koos
Franzke, Martin
Hirt, Gerhard
Scaling effects in the miniaturization of the deep drawing process
Contribution to a conference proceedings (2007)
Justinger, Holger
Hirt, Gerhard
Neue Ansätze in der inkrementellen Blechumformung (IBU) : Erweiterung des Anwendungsspektrums durch Verfahrenskombination
Contribution to a conference proceedings (2007)
Ames, Jochen Peter
Ziegler, Simon
Hirt, Gerhard
Herstellung von Tailor Rolled Strips durch Bandprofilwalzen
Contribution to a conference proceedings (2007)
Jackel, Frank Martin
Hirt, Gerhard
Bertram, Franz-Josef
Krückels, T.
Hot workabillity of as-cast high manganese-high carbon steel
Journal Article (2007)
Bleck, Wolfgang
Phiu-On, K.
Heering, Christoph
Hirt, Gerhard
Ermittlung von Umformgrenzen beim Freiformschmieden
Journal Article (2007)
Schneider, Verena
Hirt, Gerhard
Brethfeld, A.
Lehmann, G.
Diener, U.
Modelling of incremental bulk and sheet metal forming
Journal Article (2007)
Bambach, Markus
Barton, Gabriel
Franzke, Martin
Hirt, Gerhard
A new incremental sheet forming process based on a flexible supporting die system
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Maidagan, E.
Zettler, E.
Bambach, Markus
Rodríguez, P.
Hirt, Gerhard
Analysis of size-effects in the miniaturized deep drawing process
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Justinger, Holger
Hirt, Gerhard
Implementing and high accuracy multimesh method for incremental bulk metal forming
Contribution to a conference proceedings, Journal Article (2007)
Kopp, Reiner
Hirt, Gerhard
Hofmann, Oliver
Franzke, Martin
Barton, Gabriel
Einsatz der Schallemissionsanalyse bei der Ermittlung von Umformgrenzen beim Freiformschmieden
Journal Article (2007)
Hirt, Gerhard
Schneider, Verena
Economical and ecological benefits of process-integrated surface structuring
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Thome, Mario
Hirt, Gerhard
Experimental and numerical analysis of forming limits in CNC incremental sheet forming
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Bambach, Markus
Hirt, Gerhard
Todorova, M.
Thixoforming of steels : a status report
Contribution to a book, Contribution to a conference proceedings, Journal Article (2007)
Bleck, Wolfgang
Hirt, Gerhard
Püttgen, Wolfgang
Investigation of Flow Behaviour and Microstructure on X210CrW12 Steel in Semi-Solid State
Contribution to a conference proceedings (2006)
Shimahara, Hideki
Baadjou, René
Kopp, Reiner
Hirt, Gerhard
Semi-solid casting and forging of steel
Journal Article (2006)
Bührig-Polaczek, Andreas
Hirt, Gerhard
Afrath, Carsten
Püttgen, Wolfgang
Bleck, Wolfgang
et al.
Finite-elemente modelling of multi-pass forging accelerated by a multi-mesh-method
Contribution to a conference proceedings (2006)
Hirt, Gerhard
Barton, Gabriel
Franzke, Martin
Application of LS-Dyna in metal forming research
Contribution to a conference proceedings (2006)
Hirt, Gerhard
Meyer, Alexander
Urban, Marcus
van Santen, Johan
Surya Atmadja, Heru Eka
et al.
Thixo-forging and thixo-joining of an integrated product
Journal Article (2006)
Wang, Kai Kun
Kopp, Reiner
Hirt, Gerhard
Air bending process for load optimised profiles
Journal Article (2006)
Abratis, Cornel
Hirt, Gerhard
Kopp, Reiner
Investigation on fracture mechanism of A356 during thixo-forging
Contribution to a book, Contribution to a conference proceedings, Journal Article (2006)
Wang, Kai Kun
Kopp, Reiner
Hirt, Gerhard
Finite-elemente modeling of multi-pass forging accelerated by a multi-mesh-method
Contribution to a conference proceedings (2006)
Barton, G.
Hirt, Gerhard
Franzke, Martin
Der Zukunft Form geben
Contribution to a conference proceedings (2006)
Hirt, Gerhard
Hofmann, Oliver
Design of an improved blank holder drive system to enable combined stretch forming and CNC-incremental sheet forming
Contribution to a conference proceedings (2006)
Hirt, Gerhard
Ames, Jochen Peter
Ziegler, Simon
Microstructure evolution and tool-workpiece interactions in forming simulation
Contribution to a conference proceedings (2006)
Hirt, Gerhard
Bambach, Markus
Franzke, Martin
Li, Xiaoli
Selected successful achievements by the european members of the open die forging committee within the steel institute VDEh
Contribution to a conference proceedings (2006)
Rech, Ralf
Bender, W.
Bokelmann, D.
Golz, J.
von Hehl, A.
et al.
New potential in the field of the ring rolling research
Contribution to a conference proceedings (2006)
Michl, Dennis
Koppers, U.
Hirt, Gerhard
Tiedemann, I.
Finite-elemente modelling of radial forging of nickel-base alloys with all multi-mesh-method
Contribution to a conference proceedings (2006)
Barton, Gabriel
Li, Xiaoli
Schneider, Verena
Franzke, Martin
Hirt, Gerhard
Automated semi-solid forging of steel components by means of thixojoining
Contribution to a book, Contribution to a conference proceedings, Journal Article (2006)
Baadjou, René
Shimahara, H.
Hirt, Gerhard
Twin-roll casting of strip with tailored thickness variation
Journal Article (2006)
Gräf, Gerhard
Hirt, Gerhard
Klos, W.
Obieglo, A.
Besser simulieren
Journal Article (2006)
Hirt, Gerhard
van Putten, Koos
Thome, Mario
Investigation on forming defects during thixo-forging of aluminum alloy ALSi7Mg
Journal Article (2006)
Wang, Kaimkun
Kopp, Reiner
Hirt, Gerhard
Validation of FEA for asymmetic incremental sheet forming by on-line measurements of deformation and tool forces
Journal Article (2006)
Hirt, Gerhard
Ames, Jochen Peter
Bambach, Markus
Rheoforging of steel
Contribution to a book, Contribution to a conference proceedings, Journal Article (2006)
Knauf, Frederik
Hirt, Gerhard
Seidl, I.
Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks
Journal Article (2006)
Urban, Marcus
Krahn, M.
Hirt, Gerhard
Kopp, Reiner
Open-die forging with the assist of a robot-concepts and prospects of using the robot Technology in forging plants
Contribution to a conference proceedings (2006)
Ziegelmayer, Oliver
Kopp, Reiner
Hirt, Gerhard
Thermo-physical properties and boundary conditions for the semi-solid forging of steels and their applications by means of FEM
Contribution to a conference proceedings (2006)
Shimaraha, H.
Hirt, Gerhard
Semi solid casting and forging of steel
Contribution to a book, Contribution to a conference proceedings, Journal Article (2006)
Hirt, Gerhard
Bleck, Wolfgang
Bührig-Polaczek, Andreas
Shimahara, Hideki
Püttgen, Wolfgang
et al.
Initial experimental and numerical investigations into a class of new strategies for single point incremental sheet forming (SPIF)
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Asymmetric single point incremental forming of sheet metal
Contribution to a conference proceedings, Journal Article (2005)
Jeswiet, J.
Micari, F.
Hirt, Gerhard
Bramley, A.
Duflou, J.
et al.
Modelling and simulation of incremental changes in plasticity using multi-mesh-methods
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Franzke, Martin
Hofmann, Oliver
Kleinserienfertigung durch inkrementelle Blechumformung : Verfahrensgrenzen und Wirtschaftlichkeit
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Ames, Jochen Peter
Bambach, Markus
Virtual Reality und Simulation für umformtechnische Prozesse
Contribution to a conference proceedings (2005)
Hofmann, Oliver
Hirt, Gerhard
Kuhlen, Torsten
Plociennik, C.
Komplexe Ringquerschnitte flexibel gewalzt : Modellversuche und Modellierung
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Hofmann, Oliver
Michl, Dennis
Tiedemann, I.
Manufacturing and processing of tailored products
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Abratis, Cornel
Ames, Jochen Peter
Jackel, Frank Martin
Meyer, Alexander
Strip profile rolling - a new production process for tailor rolled strips
Abstract, Contribution to a conference proceedings (2005)
Kopp, Reiner
Hirt, Gerhard
Jackel, Frank Martin
Measurement technology in metal forming - results of the multi laboratory experiments
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Gahlert, C.
Herzig, N.
Meyer, L. W.
van Putten, Koos
Ermittlung der Formänderungsgrenzen für das Freiformschmieden von hochlegierten Stählen
Contribution to a conference proceedings (2005)
Schneider, Verena
Kopp, Reiner
Hirt, Gerhard
Ziegelmeyer, O.
Initial experimental and numerical investigations into all class of new strategies for single point incremental sheet forming (SPIF)
Contribution to a conference proceedings (2005)
Bambach, Markus
Hirt, Gerhard
Ames, Jochen Peter
Azaouzi, M.
Batoz, J. L.
et al.
Scale effects in the rolling of micro strip
Contribution to a conference proceedings (2005)
Hirt, Gerhard
Kopp, Reiner
van Putten, Koos
Analysis of cup geometry and temperature conditions in the miniturized deep drawing process
Abstract, Contribution to a conference proceedings (2005)
Justinger, H.
Hirt, Gerhard
Witulski, N.
Performance assessment of element formulations and constitutive laws
Contribution to a conference proceedings (2005)
Bambach, Markus
Hirt, Gerhard
Modelling incremtal forming using a meshless surface representation based radial basis functios
Abstract, Contribution to a conference proceedings (2005)
Hirt, Gerhard
Bambach, Markus
Quantitative Validation of FEM Simulations for Incremental Sheet Forming Using Optical Deformation Measurement
Contribution to a conference proceedings (2005)
Bambach, Markus
Hirt, Gerhard
Ames, Jochen Peter
Schnell und günstig zum Einzelstück
Journal Article (2005)
Hirt, Gerhard
Ames, Jochen Peter
Experiences in the micro forming of copper and copper alloys
Journal Article (2005)
Hirt, Gerhard
Justinger, Holger
Thome, Mario
van Putten, Koos
Manufacturing of sheet metal parts from tailor rolled blanks
Journal Article (2005)
Hirt, Gerhard
Abratis, Cornel
Ames, Jochen Peter
Meyer, Alexander
Metal flow and die filling in coining of micro structures with and without flash
Contribution to a conference proceedings (2005)
Thome, Mario
Hirt, Gerhard
Rattay, B.
A new forming strategy to realise parts designed for deep-drawing
Journal Article (2005)
Hirt, Gerhard
Ames, Jochen Peter
Bambach, Markus
Semi-solid forging of 100Cr6 and X210CrW12 steel
Contribution to a book, Contribution to a conference proceedings, Journal Article (2005)
Kopp, Reiner
Hirt, Gerhard
Shimahara, Hideki
Seidl, Ingold
Küthe, Fabian
et al.
Validation of FEM-simulation for micro deep drawing process modeling (N281)
Contribution to a conference proceedings (2004)
Witulski, Norbert
Hirt, Gerhard
Justinger, Holger
New lectures on sustainable manufacturing : a chance for collaborative ICEM activity
Contribution to a conference proceedings (2004)
Hirt, Gerhard
Kopp, Reiner
Experimental and numerical investigation of miniaturization in deep drawing
Journal Article (2004)
Hirt, Gerhard
Justinger, Holger
Witulski, Norbert
Forming strategies and process modelling for CNC incremental sheet forming
Journal Article (2004)
Hirt, Gerhard
Ames, Jochen Peter
Bambach, Markus
Kopp, Reiner
Asymmetric single point incremental forming of sheet metal
Contribution to a book, Contribution to a conference proceedings, Journal Article (2004)
Jeswiet, J.
Micari, F.
Hirt, Gerhard
Bramley, A.
Duflou, J.
et al.
Vertical continuous rheocasting of aluminium alloys
Journal Article (1995)
Zillgen, M.
Hirt, Gerhard
Engler, Siegfried
Near net shape forming of particulate-reinforced al-alloys by isothermal forming compared to semisolid forming
Contribution to a conference proceedings, Journal Article (1994)
Witulski, T.
Heussen, J. M. M.
Winkelmann, A.
Hirt, Gerhard
Kopp, Reiner
Möglichkeiten zur Produktivitätssteigerung, Qualitätsverbesserung und Materialeinsparung durch endabmessungsnahe Fertigung mit kombinierten Ur-/Umformverfahren
Contribution to a conference proceedings (1994)
Hirt, G.
Sahm, P. R.
Kopp, R.
Near net shape forming of pariculate inforced Al-alloys by isothermal forming compared to semi solid forming
Contribution to a conference proceedings (1994)
Witulski, T.
Heussen, J. M. M.
Winkelmann, A.
Hirt, G.
Kopp, R.
Formgebung im teilerstarrten Zustand
Journal Article (1994)
Kopp, Reiner
Mertens, Hans-Peter
Breuer, T.
Hirt, G.
Preliminary results in thixoforging aluminium wrought alloys
Contribution to a conference proceedings (1992)
Tietmann, A.
Bremer, T.
Hirt, G.
Kopp, R.
Formgebung im teilerstarrten Zustand: Gießschmieden - Thixoschmieden
Contribution to a conference proceedings (1992)
Tietmann, A.
Kopp, R.
Bremer, T.
Hirt, G.
Simulation des Zwei-Walzen-Gießwalzprozesses
Journal Article (1989)
Beyer, H.
Hirt, G.
Helmrath, C.
Kopp, R.
Simon, R.
Metal flow in compression of tubular parts: Predictions made with different computer programs and effect of flow stress data
Journal Article (1989)
Hirt, G.
Altan, T.
Investigation of die stresses and die deflections in forging axisymmetric parts
Journal Article (1989)
Hirt, Gerhard
Altan, T.
Beitrag zur Auslegung und Simulation von Giesswalzprozessen -
Dissertation / PhD Thesis (1988)
Hirt, Gerhard